Yamaha CRW4260TX User Guide - Page 21
Troubleshooting, Symptoms, Corrective action - driver
View all Yamaha CRW4260TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Troubleshooting Troubleshooting If CRW4260tx is not performing as expected, look up the symptoms in the following table, and take the appropriate corrective action. Symptoms Corrective action The power to the CRW4260tx is off • Check the AC power cable connection. The power to the computer is off • Check to see if the SCSI card is correctly installed. The CRW4260tx is not recognized by the computer. • Check the SCSI cable connection. • Make sure that SCSI ID numbers are assigned exclusively. • Make sure that the last device in the SCSI daisy chain is terminated correctly. The CRW4260tx does not operate • Install the SCSI driver software again. correctly The disc tray will not open • Make sure that the power to the drive is turned on. The disc ejects • Make sure that the disc is seated in the tray correctly. Incorrect operation • Make sure that the disc is seated in the tray correctly. • Make sure that you are using the correct disc. • Make sure that there is no dust, dirt, or condensation on the disc or tray. 13