Yamaha CRW4260TX User Guide - Page 17
Cable Connection
View all Yamaha CRW4260TX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Chapter 3 - Installing the Yamaha CRW4260tx Drive Cable Connection Power cable Insert the power cable securely to the "AC IN" connector on the rear panel. AC I N SCSI-1 SCSI-2 CDR ID 1 TERMINATOR LINE OUT R L OFF ON SCSI cable Connect the SCSI cable to either of the CRW4260tx rear panel SCSI connectors (1) or (2), and connect the other end of the SCSI cable to the host computer. The CRW4260tx is not supplied with a SCSI cable. You will need to obtain one that will fit the drive and the host computer connectors. AC I N SCSI-1 SCSI-2 CDR ID 1 TERMINATOR LINE OUT R L OFF ON To the next SCSI device: host computer, hard disk drive, etc. 9
Chapter 3 - Installing the Yamaha CRW4260tx Drive
9
Cable Connection
Power cable
Insert the power cable securely to the “AC IN” connector on the rear
panel.
SCSI cable
Connect the SCSI cable to either of the CRW4260tx rear panel SCSI
connectors (1) or (2), and connect the other end of the SCSI cable to
the host computer.
The CRW4260tx is not supplied with a SCSI cable. You will need to
obtain one that will fit the drive and the host computer connectors.
SCSI-1
SCSI-2
LINE OUT
CDR ID
L
R
AC
I N
1
TERMINATOR
OFF
ON
SCSI-1
SCSI-2
LINE OUT
CDR ID
L
R
AC
I N
1
TERMINATOR
OFF
ON
To the next SCSI device: host
computer, hard disk drive, etc.