Yamaha CSP-150 CSP-170/CSP-150 Owners Manual - Page 15
Turn down the volume., Turn the power on., Adjust the volume., After you finish your performance
View all Yamaha CSP-150 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Playing the Clavinova as a Piano 3 Turn down the volume. Turn down the [MASTER VOLUME] slider located at the right of the panel to "MIN." 4 Turn the power on. Press the [1] (Standby/On) switch located at the right of the panel to turn the power on. The power indicator located below the left end of the panel lights up. After that, the Stream Lights located above the highest key flash a few seconds, and the power turns on. [1] (Standby/On) switch The power indicator lights up. 5 Adjust the volume. Play the keyboard to produce sound and turn up the [MASTER VOLUME] slider slowly while you adjust the volume. CAUTION Do not use the instrument at a high volume level for a long period of time, or your hearing may be damaged. 6 After you finish your performance, turn the power off. Press and hold the [1] (Standby/On) switch for about a second. The power indicator turns off. CAUTION Even when the instrument is turned off, electricity is still flowing to the instrument at the minimum level. When you are not using the instrument for a long time or during electrical storms, make sure you unplug the AC power plug from the wall AC outlet. NOTICE • Do not press any keys or pedals until the instrument has completely started up (the Stream Lights stop flashing) after turning on the switch. Doing so may cause malfunction. • If you need to force-quit the instrument, hold down the [1] (Standby/On) switch for longer than three seconds. Keep in mind that the force-quit operation might cause data loss and damage to the instrument. CSP-170/CSP-150 Owner's Manual 15