Yamaha CSP-150 CSP-170/CSP-150 Owners Manual - Page 33

Connecting a footswitch/foot controller ([AUX PEDAL] jack) The FC4A or FC5 footswitches and the FC7 foot controller (sold separately) can be connected to [AUX PEDAL] jack. A footswitch can be used for switching functions on and off, while a foot controller controls continuous parameters such as volume. To assign the function to the connected pedal, refer to the Pedal Setting in the Utility Menu in the Smart Pianist smart device app. Connections Foot pedals Footswitch FC4A Footswitch FC5 NOTE Make sure to connect or disconnect the pedal only when the power is off. Foot controller FC7 Connecting a microphone or guitar ([MIC/LINE IN] jack, [MIC/LINE] switch) The [MIC/LINE IN] jack (standard 1/4" phone jack) lets you connect a microphone, guitar, or other audio equipment. Note that you need to select "MIC" or "LINE IN" depending on the connected equipment. When the output level of the connected equipment (such as a microphone, guitar, bass) is low, set the [MIC/LINE] switch to "MIC." When the output level of the connected equipment (such as a synthesizer, keyboard, CD player) is high, set the [MIC/LINE] switch to "LINE." 1 Before turning on the power of the instrument, set the [INPUT VOLUME] knob to the minimum position. 2 Connect the microphone or the guitar to the [MIC/LINE IN] jack. NOTE Make sure you have a conventional dynamic microphone. 3 Set the [MIC/LINE] switch to "MIC" or "LINE" depending on the instrument to be connected. 4 Turn on the power of the Clavinova. 5 (If necessary, turn on the microphone) Adjust the [INPUT VOLUME] knob while singing into the microphone or playing the guitar. 6 After you finish your performance, turn the [INPUT VOLUME] knob to minimum before removing the microphone or the guitar. 7 Remove the microphone or the guitar from the [MIC/LINE IN] jack. CSP-170/CSP-150 Owner's Manual 33