Yamaha CVP-900 Owner's Manual - Page 155
Using the TO HOST terminal, IBM-PC/AT (Windows), Macintosh, Using the MIDI terminals - owners manual
View all Yamaha CVP-900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 155 highlights
Using Your Clavinova with Other Devices Using the TO HOST terminal Connect the serial port of the personal computer (RS232C terminal or RS-422 terminal) to the TO HOST terminal of the CVP-900. For the connection cable, use the appropriate cable below (sold separately) that matches the personal computer type. If your system does not work properly with the connections and settings listed above, your software may require different settings. Check your software operation manual and set the HOST SELECT switch to the proper data transfer rate. (Data transfer rate of "PC-1" is 31,250 bps.) Using the MIDI terminals When using a MIDI interface device installed in the personal computer, connect the MIDI terminals of the personal computer and the CVP-900 with standard MIDI cables. • When the computer has a MIDI interface installed, connect the MIDI OUT terminal of the personal computer to the MIDI IN terminal. Set the HOST SELECT switch to "MIDI." ■ IBM-PC/AT (Windows) Connect the RS-232C terminal on the computer to the TO HOST terminal on the CVP-900 using a serial cable (D-SUB 9P → MINI DIN 8P cross cable). Set the CVP-900 HOST SELECT switch to the "PC-2." (Data transfer rate is 38,400 bps.) Clavinova MIDI IN MIDI OUT Mac MIDI PC-1 PC-2 MIDI OUT MIDI IN NEC MultiSync PC-9821 AS NEC Clavinova MINI DIN 8-pin NEC MultiSync PC-9821 AS D-sub NEC 9-pin Mac MIDI PC-1 PC-2 MINI DIN 8-pin D-sub D-sub 25-pin 9-pin * When using a D-SUB 25P → MINI DIN 8P cross cable, connect using a DSUB9P plug adaptor on the computer side of the cable. ■ Macintosh Connect RS-422 terminal (modem or printer) on the computer to the TO HOST terminal on the CVP-900 using a serial cable (system peripheral cable, 8 bit). Set the CVP-900 HOST SELECT switch to the "MAC" (Data transfer rate is 31,250 bps). Set the MIDI interface clock in the sequencer you are using to 1 MHz. For details, refer to the owner's manual for the particular software you are using. • When using a MIDI interface with a Macintosh series computer, connect the RS-422 terminal of the computer (modem or printer terminal) to the MIDI interface, then connect the MIDI OUT terminal on the MIDI interface to the MIDI IN terminal of the CVP900, as shown in the diagram below. Set the HOST SELECT switch to "MIDI." Clavinova MIDI IN MIDI OUT RS422 MINI DIN 8-pin Mac MIDI PC-1 PC-2 • When the HOST SELECT switch is set to "MIDI," the TO HOST terminal is disabled. • When using a Macintosh series computer, set the MIDI interface clock setting in the application software to match the setting of the MIDI interface you are using. For details, refer to the owner's manual for the particular software you are using. Clavinova MINI DIN 8-pin MINI DIN 8-pin Mac MIDI PC-1 PC-2 CVP-900 155