Yamaha CVP-92 Owner's Manual - Page 140

CHAPTER 8: Others The Connectors I [PHONES] Jacks To use headphones, connect them to one of PHONES the [PHONES] jacks (standard 1/4" phone jacks). The internal speaker system of the CVP-94/92 is automatically shut off when a pair of headphones are connected. Two people can enjoy the sound together by connecting two pairs of headphones to the two available terminals. Recommended Headphones: • Yamaha HPE-160 headphones I AUX IN [L/L+R] Jacks L/L+R R AUX IN The sounds of other instruments or tone generator modules can be output through the speaker system of the CVP-94/92 by connecting audio cables to the jacks as shown below. Tone Generator I AUX OUT [L/L+R] [R] Jacks L/L+R R AUX OUT By connecting audio cables to the jacks as shown below, output the sound of the CVP-94/ 92 to a stereo system, amplifier, mixing console, or recording equipment. Set the [MASTER VOLUME] of the CVP-94/92 to around the middle position and adjust the volume level from the connected equipment. • Do not return the sound output through AUX OUT [L/L+R] [R] jacks to the AUX IN [L/L+R] [R] jacks. Also, when connecting the AUX OUT [L/L+R] [R] jacks to external audio equipment, do not connect these devices back into the CVP-94/ 92's AUX IN [L/L+R] [R] jacks. Since the input sound from the CVP-94/92's AUX IN [L/L+R] [R] is output through the CVP-94/92's AUX OUT [L/L+R] [R] as is, connecting as described above may result in feedback, making normal playback impossible and even resulting in damage to the instrument. • Internal [MASTER VOLUME] and [REVERB] settings cannot be applied to the input sound received at the AUX IN [L/L+R] [R] jacks. • Use the AUX IN [L/L+R] and AUX OUT [L/L+R] jacks for mono input and mono output, respectively. Stereo System 138