Yamaha DT50K Drum Trigger Module Setup Manual for DT50S/DT50K - Page 17
DTX900, Checking the Firmware Version
View all Yamaha DT50K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
DTX900 DTX900M/DTX900/DTXTREME III Unless otherwise noted, "DTX900" in this manual refers to the DTX900M, DTX900, and DTXTREME III drum trigger modules. Please interpret it as referring to your module. Checking the Firmware Version Depending on the version of the firmware, you may need to update it. Before you connect the module to your DT50S/DT50K triggers, be sure to check the version of your module's firmware. 1. While holding down the [F1] button and the [REC] button simultaneously, turn on the drum trigger module. 2. Confirm the version displayed on-screen. If the version is 1.05 or earlier, search for "DTX900" on the web site below, and then follow the steps on the Firmware Updater page to update the firmware. Yamaha Downloads: http://download.yamaha.com Confirm that the drum trigger module has been updated to Version 1.10, and then proceed to the setup procedures on the following page. 17