Yamaha DVD-S520 Owner's Manual - Page 10
NTSC/PAL Settings, NTSC/PAL Conversion, Component Video terminal <A>, S-Video terminal <B> - codes
View all Yamaha DVD-S520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Component Video terminal Component video connection achieves high fidelity in reproducing colors (better performance than S-video connection), separating video signal into luminance (Y, terminal color-coded as green), and color difference (PB, blue/PR, red). Use commercially available coaxial cables. Receiver (and TV) with component input is required. Observe the color of each jack when connecting. If your receiver does not have component output jacks, connecting the player's component output directly to your TV's component input can reproduce better video image. Note: - Do not connect the player's COMPONENT VIDEO OUT jacks to component video input jacks special for HD (HighDefinition) TV. S-Video terminal S (separate) video connection achieves a clearer picture than composite video connection by separating color and luminance when transmitting signals. Use commercially available S-video cable. Receiver (and TV) with S-video input is required. Composite Video terminal (1, 2) Use RCA video cable supplied with the player when connecting the player to a TV. VIDEO 1, 2 jacks of VIDEO OUT output the same signal. You can connect one to your receiver's input using supplied RCA cable, and the other to another receiver or a TV. NTSC/PAL Settings You can switch the NTSC/PAL setting of the player to match the video signal of your TV.This setting only affects the television's on-screen display that shows the stop and setup modes.You may select either NTSC or PAL.To change the player setting to PAL or NTSC, follow the steps below. 1 Press the POWER button on the front panel of the player to turn off the player. 2 Press and hold 9 and T on the front of the player.While holding 9 and T, press POWER. 3 After PAL or NTSC appears on the player display, release 9 and T at the same time.The PAL or NTSC indicator that appears on the player display indicates the current setting. 4 To change the setting, press T within three seconds.The new setting (PAL or NTSC) will appear on the player display. NTSC/PAL Conversion The player is equipped with a NTSC/PAL conversion feature to convert the video output of the disc to match your TV system.The conversions supported are as below: Disc Type Format DVD VCD NTSC PAL NTSC PAL Output format Selected mode NTSC PAL AUTO NTSC PAL60 NTSC Not Supported PAL PAL NTSC PAL60 NTSC NTSC PAL PAL Select among NTSC, PAL and AUTO. See 'Personal Preferences' for operational procedure. Notes: - AUTO can only be selected when using a TV that has both the NTSC and PAL systems. - Slight picture distortions may occur due to this conversion. This is normal.Thus, the AUTO format is most suitable for the best picture quality. 6 PREPARATION