Yamaha DVD-S700 Owner's Manual - Page 12

Connection Connecting to an AV amplifier which does not contain Dolby Digital (AC-3)/MPEG audio decoder This DVD/VIDEO CD/CD player contains a Dolby Digital (AC-3)/MPEG audio decoder. This enables the playback of DVDs recorded in Dolby Digital Surround, MPEG audio or Linear PCM without the need for an optional decoder with Dolby Digital, MPEG audio or Linear PCM processing. When the DVD player is connected to an AV amplifier with 5.1ch input connectors, you can enjoy theaterquality audio right in your home when playing discs recorded in Dolby Digital Surround, MPEG audio or Linear PCM. 6CH DISCRETE INPUT DVD/LD CENTER SURROUND MAIN L R SUB WOOFER VIDEO SIGNAL AUDIO SIGNAL L R DVD/LD Audio cord (optional) Video/audio cord (supplied) TV set (optional) AV amplifier without Dolby Digital (AC-3)/ MPEG audio decoder (optional) COAXIAL PCM/U DIGITAL MPEG OPTICAL DIGITAL 6CH DISCRETE CENTER SURROUND MAIN L L MIXED 2CH L VIDEO 1 S VIDEO R R SUBWOOFER AUDIO OUT R 2 VIDEO OUT DVD/VIDEO CD/CD player AC IN Notes: ÁAfter connection is made, set the "Speaker setting" (such as Yes/No and Large/Small) according to your speaker system. (See page 39.) ÁIf the surround speakers or the center speaker can't be installed at an equal distance to (or further away from) the front speakers from the listening position, then change the delay time setting at the "Speaker setting" on page 39, to compensate. ÁIf the surround speakers are set to "None" at the "Speaker setting" (see page 39), the discs recorded in MPEG 2 audio or Linear PCM will be played back only in 2 channels even when the center speaker is connected as well as the front speakers. ÁDVDs recorded in Linear PCM/96 kHz sampling in which "Center Speaker" is contained will also be played back only in 2ch. 12