Yamaha DVD-S830 Owner's Manual - Page 6

Connection Audio connection [Note] ≥The equipment connections described are examples. ≥Peripheral equipment and optional cables sold separately unless otherwise indicated. ≥Before connection, turn off all equipment and read the appropriate operating instructions. A Digital connection Connect an amplifier with Dolby Digital and DTS decoders. You can also enjoy high-quality stereo sound with sampling frequencies of 88.2 and 96 kHz if the material isn't copyprotected and the equipment you connect is compatible with these signals. Change "Digital output" (➡ page 19). B Analogue (6CH DISCRETE) connection Connect an amplifier with multi-channel audio input terminals to enjoy surround sound. This unit can decode Dolby Digital and DTS and there are no limitations on sampling frequency with this kind of connection. To obtain maximum performance of DVD-Audio multichannel linear PCM sound, the connections are recommended. Change "Speaker setting" (➡ page 20). C Analogue (MIXED 2CH) connection Connect these jacks to the AUDIO L and R input jacks of your amplifier using the supplied Audio/Video cable. Insert fully, with this side facing up. Coaxial cable Optical digital audio cable Do not bend sharply when connecting. COAXIAL OPTICAL DIGITAL INPUT Audio pin cable CENTER SUB SURROUND MAIN WOOFER (R) (L) (R) (L) 6 CH INPUT Amplifier Audio/video cable (included) See "Video connection" (➡ page 7) (R) (L) AUDIO Amplifier Speakers (example) Speakers (example) RQT6797 6