Yamaha DVD-S830 Owner's Manual - Page 7

Video connection This unit equips three types of video jacks as follows: D VIDEO jack This jack transmits conventional composite video signal. Connect this jack to your AV amplifier so that you can switch the both audio and video inputs at once. E S VIDEO jack This jack transmits color and luminance separately and achieves high quality color reproduction. Connect this jack to your television using a commercially available SVideo cable. If your AV amplifier is equipped with S VIDEO input and output jacks, connect to the AV amplifier so that you can switch both audio and video inputs at once. F AV (SCART) jack This SCART jack can output RGB component signals and provides the best quality picture. Connect this jack to your television. ≥Change "Video-AV Output" (➡ page 18). yellow Audio/video cable (included) yellow VIDEO DVD S video cable S VIDEO DVD 21-pin SCART cable VCR Amplifier Video pin cable Television S video cable [Note] Do not connect this unit to a television through a video cassette recorder. If you do so, the picture may not be played back properly due to the copyright protection technology incorporated in this unit. Connecting the power cable Power cable (included) To the wall outlet Plug the power cable into the AC IN when all connections are complete, and then plug this unit to the wall outlet. FOR THE UNITED KINGDOM ONLY READ THE CAUTION FOR THE AC MAINS LEAD ON PAGE 2 BEFORE CONNECTION. Caution Do not use other AC power cables than the one provided. Otherwise it may result in causing fire or an electrical shock. RQT6797 7