Yamaha EF2000iS Owners Manual - Page 12
CONTROL FUNCTION, DC protector - won t start
View all Yamaha EF2000iS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
AE00101 CONTROL FUNCTION 2 1 AE00121 Engine switch The engine switch controls the ignition system. 7DK-018 1 7 "ON" Ignition circuit is switched on. The engine can be started. 2 5 "STOP" Ignition circuit is switched off. The engine will not run. AE00111 Oil warning light (Red) When the oil level falls below the lower level, the oil warning light comes on and then the engine stops automatically. Unless you refill with oil, the engine will not start again. TIP If the engine stalls or does not start, turn the engine switch to "ON" and then pull the recoil starter. If the oil warning light flickers for a few seconds, the engine oil is insufficient. Add oil and restart. 700-115 DC protector The DC protector turns off 2 automatically when electric device being connected to the generator is operating and current above the rated flows. To use this equipment again, turn on the DC protector by pressing its button to "ON" 1. 21 7DK-052 1 "ON" Direct current is output. (This is the default position.) 2 "OFF" Direct current is not output. -7-