Yamaha EF2000iS Owners Manual - Page 31

Air filter, Do not wring out the foam element when squeezing - leaking oil

Get Yamaha EF2000iS - Inverter Generator PDF manuals and user guides View all Yamaha EF2000iS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

1 2 2 AE01084 Air filter 1. Remove the screws 1, and then remove the cover 2. 7DK-030 2. Remove the screw 1 and then remove the air filter case cover 2. 1 1 7DK-061 3. Remove the foam element 1. 4. Wash the foam element in solvent and dry it. 5. Oil the foam element and squeeze out excess oil. The foam element should be wet but not dripping. Recommended oil: Foam-air-filter oil or SAE #20 motor oil NOTICE Do not wring out the foam element when squeezing it. This could cause it to tear. 6. Insert the foam element into the air filter case. TIP Be sure the foam element sealing surface matches the air filter so there is no air leak. NOTICE 7DK-062 The engine should never run without the foam element; excessive piston and cylinder wear may result. 7. Install the air filter case cover in its original position and tighten the screw. 8. Install the cover and tighten the screws. - 26 -

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
–
26
–
AE01084
Air filter
1.
Remove the screws
1
, and then remove the cover
2
.
2.
Remove the screw
1
and then remove the air filter
case cover
2
.
1
2
7DK-030
1
2
7DK-061
3.
Remove the foam element
1
.
4.
Wash the foam element in solvent and dry it.
5.
Oil the foam element and squeeze out excess oil.
The foam element should be wet but not dripping.
Do not wring out the foam element when squeezing
it.This could cause it to tear.
6.
Insert the foam element into the air filter case.
TIP
Be sure the foam element sealing surface matches the
air filter so there is no air leak.
The engine should never run without the foam ele-
ment; excessive piston and cylinder wear may
result.
7.
Install the air filter case cover in its original position
and tighten the screw.
8.
Install the cover and tighten the screws.
NOTICE
NOTICE
Recommended oil:
Foam-air-filter oil or SAE #20 motor oil
7DK-062
1