Yamaha ELS-01 Owner's Manual - Page 40

3 PITCH Controls pitch according to the play style of Horizontal Touch or After Touch. On some Voices in the Lead Voice 2 section, not only pitch but also timbre may be affected. NOTE Parameters that are available only on the ELS-01C are indicated by a dark frame and background in their display controls. 3 -1 HORIZONTAL touch (ELS-01C only) Controls the pitch by holding down the key and moving it laterally (wiggling your finger from side to side). The faster you move the key laterally, the faster and greater the pitch change becomes, within a range of +/- one octave. You can use this function in combination with Touch Tone described above to add expressiveness to your performance. Higher settings result in a wider pitch change. The minimum setting produces 4 no effect. This function is not available on the Pedalboard. Range: 0 - 14 3 -2 AFTER touch Controls the pitch according to the pressure you apply to the keys after playing them. The minimum setting produces no effect at all. Higher (positive) settings make the pitch higher according to the pressure and lower (negative) settings make the pitch lower. The setting of +14 or -14 results in the widest pitch change. Range: -14 - +14 Voice Controls and Effects 4 FEET Determines the octave setting of the Voice, letting you use the Voice over a wide register. There are three settings: 4', 8' and 16' (4' is highest and 16' is lowest). A 2' setting is added to the Pedal Voice sections. PRESET is the original (factory) setting. 5 REVERB Determines the amount of reverb applied to each Voice section. When the panel REVERB control is set to the minimum, the setting here will have no effect. See page 43 for details. 6 VOLUME Fine adjustment of the Voice volume. See page 25 for more information. Reference Page Solo function (page 27) 7 PRIORITY (only for the Lead Voice 2) Determines the mode of Lead Voice 2, Last or Top. LAST: Only the last played key is sounded when two or more keys are played simultaneously. TOP: Only the highest note is sounded when two or more keys are played simultaneously. When the Solo mode is on, Lead Voice 2 sounds according to Last mode, regardless of the setting made here. 8 POLY (only for Pedal Voices) Allows you to switch the pedal polyphonic mode on or off. Setting POLY to on switches the normally monophonic pedal Voices to polyphonic play. This makes it possible to play the Pedalboard in various expressive ways, such as playing legato or playing intervals and chords. Keep in mind that you cannot exceed the total maximum polyphony: 14 notes for all sections, Upper, Lower and Pedal. 40 ELS-01/01C Owner's Manual