Yamaha EMX5016CF Owner's Manual - Page 10
Adding Some Reverb, Set the EFF1 RTN fader to - owners manual
![]() |
UPC - 086792856216
View all Yamaha EMX5016CF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Mixer Basics Quick Guide Adding Some Reverb You can use the reverb effect to simulate the sound of a concert hall or jazz club. EFF1 knobs PROGRAM dial EFF1 ON switch EFF1 RTN fader 1 Turn the EFFECT1 PROGRAM dial to select the desired effect type. To select a reverb effect, turn the dial to any value from 1 to 5. 1 HALL 1 5 SMALL STAGE 1 9 CHORUS C 2 ROOM 1 6 VOCAL ECHO 0 EARLY REF. D 3 PLATE 1 7 KARAOKE A GATE REVERB E 4 LARGE STAGE 1 8 DELAY B REVERSE GATE F 2 To turn on the effector, set the EFF1 ON switch to its ON position ( ). The switch lights up when turned on. As an alternative to the ON switch, you can use a separately sold FC5 foot switch to toggle the effector on and off. TREMOLO SINGLE DELAY DYNA FILTER PITCH CHANGE 3 Set the EFF1 RTN fader to the "0" position. 4 Use the channel EFF1 knobs to adjust the effect depth for each channel. 5 Use the EFF1 RTN fader to adjust the overall effect depth. Note that you can use the PARAMETER knob to adjust the characteristic sound of the selected effect. If you have selected a reverb effect, the knob adjusts the reverb time. 10 EMX5016CF Owner's Manual
![](/manual_guide/products/yamaha-emx5016cf-owners-manual-af4f5fb/10.png)