Yamaha EMX5016CF Owner's Manual - Page 22
Digital Effects SEND Jacks, PROGRAM Dials, PARAMETER Knobs, AUX1/2 Knobs - 16 channel power mixer
![]() |
UPC - 086792856216
View all Yamaha EMX5016CF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Reference Front & Rear Panels Digital Effects Section H I I J J K K L L M M N N 22 EMX5016CF Owner's Manual H SEND Jacks • EFF1, EFF2 These unbalanced phone output jacks output the signal from the EFFECT1/2 buses. You use these jacks, for example, to connect to an external effector. You can then return the signal by connecting the external effector to any of the LINE jacks on channel pairs 9/10 to 15/16. CAUTION If you are returning a signal from an external effector into a LINE jack on any channel pair 9/10 to 15/16, please be sure to turn the EFF1/2 knob for that channel pair to "0". • AUX1, AUX2 These unbalanced phone jacks output monaural monitor signals from the AUX1 and AUX2 buses, respectively. You use these jacks, for example, to connect to an effector or to a cue box or other such monitoring system. I PROGRAM Dials These let you select the type of effect from 16 different types for EFFECT 1 and EFFECT 2. For details on each of the effect types, refer to page 37. J PARAMETER Knobs Each knob adjust the parameter (depth, speed, etc.) associated with the selected effect type. NOTE The mixer saves the last value used with each effect type. When you change to a different effect type, the mixer automatically restores the value that was previously used with that type (regardless of the current position of the PARAMETER knob). K AUX1/2 Knobs Each knob adjusts the level of the effected sound into the corresponding AUX1 and AUX2 buses. L EFF1/2 ON Switches/Indicators Switches use of the internal effect on or off. The internal effect is applied only if this switch is turned on. To set the switch on, press it in so that it lights up. As an alternative to the ON switch, you can use a separately sold FC5 foot switch to toggle the effector on and off. NOTE The On/Off status of the internal effects will be retained, even when you turn off the mixer's power. M PFL (Pre-Fader Listen) Switches Set this switch on to feed the signal from the internal digital effect signal (pre the EFF1/2 RTN faders) into the PFL bus, so that it can be monitored at the PHONES jack. NOTE • The signal will not feed into the PFL bus if the effect's ON switch is turned off. • The PFL (F, M, i) and AFL j switches select the mix to be monitored at the PHONES jack. If the channel's PFL or AFL switch is ON, the channel's output is mixed into the monitor signal to the PHONES jack. If both switches are OFF, the channel output is not fed to the PHONES jack. N EFF1/2 RTN Faders Adjusts the level of the effected sound into the Stereo bus.
![](/manual_guide/products/yamaha-emx5016cf-owners-manual-af4f5fb/22.png)