Yamaha HTR-3069 HTR-3069 Owner s Manual - Page 58
Function
View all Yamaha HTR-3069 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Function Configures the functions that make the unit easier to use. Note Default settings are underlined. n Input Rename Changes the input source name displayed on the front display. You can also select a name from the presets or a name created by the Auto Rename function. Input sources HDMI 1-4, AUDIO 1-2, AV 1-3, Bluetooth, AUX Default HDMI 1-4: Auto Others: Manual (For Bluetooth, AUX only "Manual" can be selected.) Procedure to rename automatically 1 Use the cursor keys (q/w) to select an input source to be renamed. 2 Use the cursor keys (e/r) to select "Auto". The unit creates a name automatically according to the connected device. 3 To check a created name, press ENTER. Note During selecting "Auto", the created name is saved even after the device connection is terminated. To reset to the default setting, switch the setting to "Manual" at once and then set it again to "Auto". 4 To change another input source name, repeat steps 1 to 3. 5 To exit from the menu, press SETUP. Procedure to rename manually 1 Use the cursor keys (q/w) to select an input source to be renamed. 2 Use the cursor keys (e/r) to select "Manual" and press ENTER. Note To select the preset name, use the cursor keys (e/r). 3 Press ENTER. The edit screen is displayed. 4 Use the cursor keys and ENTER key to edit the name, and then select "OK" to confirm the new name. Note To cancel the entry, select "CANCEL". 5 To change another input source name, repeat steps 1 to 4. 6 To exit from the menu, press SETUP. 58 En