Yamaha HTR-3069 HTR-3069 Owner s Manual - Page 66
Audio
View all Yamaha HTR-3069 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Problem The unit cannot be controlled using the remote control. Cannot select the desired input source even if "INPUT" is pressed. The RED/GREEN/YELLOW/BLUE keys of the remote control do not operate. Cause The unit is out of the operating range. The batteries are weak. The unit's remote control sensor is exposed to direct sunlight or strong lighting. The remote control IDs of the unit and the remote control are not identical. The function which skips some input sources is set. The device which is connected to the unit via HDMI does not support the operation of the RED/GREEN/YELLOW/BLUE keys. The settings of the RED/GREEN/YELLOW/BLUE keys of the unit's remote control have been changed. Remedy Use the remote control within the operating range (p.4). Replace with new batteries. Adjust the lighting angle, or reposition the unit. Change the remote control ID of the unit or the remote control (p.62). Set "Input Skip" of the desired input source in the "Setup" menu to "Off" (p.59). Use a device which supports the operation of the RED/GREEN/YELLOW/BLUE keys. Set the "Remote Color Key" settings in the "Setup" menu to "Default" (p.60). Audio Problem No sound. The volume cannot be increased. No sound is coming from a specific speaker. Cause Remedy Another input source is selected. Select an appropriate input source with the input selection keys. Signals that the unit cannot reproduce are being input. Some digital audio formats cannot be played back on the unit. To check the audio format of the input signal, use "Signal Info." in the "Option" menu (p.45). The cable connecting the unit and playback device is defective. If there is no problem with the connection, replace with another cable. The maximum volume is set. Use "Max Volume" in the "Setup" menu to adjust the maximum volume (p.56). A device connected to the output jacks of the unit is not turned on. Turn on all devices connected to the output jacks of the unit. The playback source does not contain a signal for the channel. To check it, use "Signal Info." in the "Option" menu (p.45). The currently selected sound program/decoder does not use the speaker. To check it, select "5ch Stereo" (p.31). Audio output of the speaker is disabled. Perform YPAO (p.25) or use "Configuration" in the "Setup" menu to change the speaker settings (p.50). The volume of the speaker is set too low. Perform YPAO (p.25) or use "Level" in the "Setup" menu to adjust the speaker volume (p.52). The speaker cable connecting the unit and the speaker is defective. If there is no problem with the connection, replace with another speaker cable. The speaker is malfunctioning. To check it, replace with another speaker. If the problem persists, the unit may be malfunctioning. 66 En