Yamaha HTR-3069 HTR-3069 Owner s Manual - Page 62
Selecting the HDMI 4K signal format 4K MODE
View all Yamaha HTR-3069 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
Selecting the remote control ID (REMOTE ID) CHARGE OUT ECO REMOTE ENHANCER STEREO TUNED SLEEP MUTE VOL. ID••ID1 ADAPTIVE DRC VIRTUAL Change the unit's remote control ID so that it matches the remote control's ID (default: ID1). When using multiple Yamaha AV receivers, you can set each remote control with a unique remote control ID for its corresponding receiver. Settings ID1, ID2 n Changing the remote control ID of the remote control 1 To select ID1, while holding down the cursor key (e), hold down SCENE (BD/DVD) for more than 3 seconds. To select ID2, while holding down the cursor key (e), hold down SCENE (TV) for more than 3 seconds. Changing the FM/AM tuning frequency setting (TU) (Asia, Taiwan and General models only) CHARGE ENHANCER STEREO TUNED SLEEP MUTE OUT VOL. ECO TU••••FM50/AM9 ADAPTIVEDRC VIRTUAL Change the FM/AM tuning frequency setting of the unit depending on your country or region. Settings FM100/AM10 FM50/AM9 Select this when you want to adjust the FM frequency by 100-kHz steps and AM by 10-kHz steps. Select this when you want to adjust the FM frequency by 50-kHz steps and AM by 9-kHz steps. Switching the video signal type (TV FORMAT) CHARGE OUT ECO TV ENHANCER STEREO TUNED SLEEP MUTE VOL. FORMAT•NTSC ADAPTIVEDRC VIRTUAL Switch the video signal type of HDMI output so that it matches to the format of your TV. Since the unit automatically selects the video signal type so that it matches to the TV, it is unnecessary to change the setting normally. Change the setting only when images on the TV screen do not appear correctly. Settings NTSC, PAL Default U.S.A., Canada, Korea, Taiwan and General models: NTSC Other models: PAL Selecting the HDMI 4K signal format (4K MODE) 4K MODE•MODE 2 Selects the format of signals input/output at the unit when HDMI 4K (60 Hz/50 Hz) compatible TV and playback device are connected to the unit. Settings MODE 1 MODE 2 Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:4:4, 4:2:2 or 4:2:0 format. Depending on the connected device or HDMI cables, video may not be displayed correctly. In this case, select "MODE 2". Inputs/outputs 4K (60 Hz/50 Hz) signals in 4:2:0 format. Note When "MODE 1" is selected, use a high-speed HDMI cable that supports 18 Gbps. 62 En