Yamaha HTR-5920 Owners Manual

Yamaha HTR-5920 Manual

Get Yamaha HTR-5920 PDF manuals and user guides View all Yamaha HTR-5920 manuals
Add to My Manuals
Save this manual to your list of manuals

Yamaha HTR-5920 manual content summary:

  • Yamaha HTR-5920 | Owners Manual - Page 1
    U HTR-5920 AV Receiver Ampli-tuner audio-vidéo OWNER'S MANUAL MODE D'EMPLOI
  • Yamaha HTR-5920 | Owners Manual - Page 2
    damage to the product due to lightning and power-line surges. 15 Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna
  • Yamaha HTR-5920 | Owners Manual - Page 3
    SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250. PART H) FCC INFORMATION (for US customers) 1 IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications
  • Yamaha HTR-5920 | Owners Manual - Page 4
    the AC power source as long as it is connected to the wall outlet, even if this unit itself is turned off by STANDBY MODEL: Serial No.: The serial number is located on the rear of the unit. Retain this Owner's Manual in a safe place for future reference. We Want You Listening For A Lifetime YAMAHA
  • Yamaha HTR-5920 | Owners Manual - Page 5
    display 31 Adjusting speaker levels 32 ADDITIONAL INFORMATION TROUBLESHOOTING 33 RESETTING THE SYSTEM 37 GLOSSARY 38 Audio formats 38 Audio information 39 Video signal information 39 SPECIFICATIONS 40 BASIC OPERATION PLAYBACK 20 Basic operations 20 Enjoying surround sounds 22 FM/AM
  • Yamaha HTR-5920 | Owners Manual - Page 6
    FEATURES Built-in 6-channel power amplifier ◆ Minimum RMS output power per channel [Front, center, and surround channels] 80 W (1 kHz, 0.1% THD, 6 Ω) 110 W (1 kHz, 10% THD, 6 Ω) [Subwoofer channel] 110 W (50 Hz, 6 Ω) Decoders for multi-channel surround sound ◆ Dolby Digital decoder ◆ Dolby
  • Yamaha HTR-5920 | Owners Manual - Page 7
    Supplied accessories Please check that you received all of the following parts. Remote control STANDBY POWER CD MD/CD-R TUNER SLEEP DVD Change all of the batteries if you notice a decrease in the operation range of the remote control. • Do not use an old battery together with a new one. • Do not
  • Yamaha HTR-5920 | Owners Manual - Page 8
    When you turn on this unit, you will hear a click and there will be a 4 to 5-second delay before this unit can reproduce sound. Note In the standby mode, this unit consumes a small amount of power in order to receive infrared-signals from the remote control. 2 Remote control sensor Receives signals
  • Yamaha HTR-5920 | Owners Manual - Page 9
    LFE channel) as well as those 2-channel signals without effect sounds to the front left and right speakers. PROGRAM l / h Selects the surround mode. C TONE CONTROL Adjusts the bass/treble balance of the front left and right speakers in conjunction with BASS/TREBLE +/-. BASS/TREBLE +/- Adjusts the
  • Yamaha HTR-5920 | Owners Manual - Page 10
    AND FUNCTIONS Remote control 1 2 STANDBY POWER A 3 speaker channel to be adjusted and sets the output level. 0 Surround mode selector buttons Select the surround modes. A POWER Turns on 2-channel signals without effect sounds to the front left and right speakers. G NIGHT Turns on or off the
  • Yamaha HTR-5920 | Owners Manual - Page 11
    operation. 30º 30º Approximately 6 m (20 ft) Notes • Do not spill water or other liquids on the remote control. • Do not drop the remote control. • Do not leave or store the remote control in the following types of conditions: - places of high humidity, such as near a bath - places of high
  • Yamaha HTR-5920 | Owners Manual - Page 12
    CONTROLS AND FUNCTIONS Front you select any of the surround mode or the listening mode 5 STEREO indicator Lights up when this unit is receiving a strong signal for an FM stereo broadcast while up when this unit is reproducing PCM (Pulse Code Modulation) digital audio signals. A SLEEP indicator Lights
  • Yamaha HTR-5920 | Owners Manual - Page 13
    MD/CD-R AUDIO DVD DTV/CBL V-AUX IN OUT VCR SURROUND SUB R L WOOFER + + MONITOR OUT Y OPTICAL COAXIAL SPEAKER CLASS 2 WIRING SPEAKERS 6ΩMIN./SPEAKER CONTROLS AND FUNCTIONS 6 1 Antenna terminals See page 17 for connection information. 2 Audio and video jacks See page 13 for connection
  • Yamaha HTR-5920 | Owners Manual - Page 14
    CONNECTIONS CONNECTIONS Placing speakers The speaker layout below shows the standard ITU-R* speaker setting. You can use it to enjoy surround sounds , because low bass sounds are not highly directional. But it is better to place the subwoofer near the front speakers. Turn it slightly toward the
  • Yamaha HTR-5920 | Owners Manual - Page 15
    be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. CAUTION • Use speakers with the specified impedance shown on the rear panel of this unit. • Before connecting the speakers, make sure that this unit is turned off. • Do
  • Yamaha HTR-5920 | Owners Manual - Page 16
    ■ FRONT terminals Connect one or two speaker systems (1, 2) to these terminals. ■ CENTER terminals Connect a center speaker (3) to these terminals. 16 ■ SURROUND terminals Connect surround speakers (4, 5) to these terminals. 2 ■ SUBWOOFER terminals 3 4 Connect the YAMAHA SW-P170 subwoofer
  • Yamaha HTR-5920 | Owners Manual - Page 17
    the availability of audio jacks on your other components. AUDIO jacks For conventional analog audio signals transmitted via left and right analog audio cables. Connect red plugs to the right jacks and white plugs to the left jacks. DIGITAL AUDIO COAXIAL jack For digital audio signals transmitted via
  • Yamaha HTR-5920 | Owners Manual - Page 18
    to enjoy the surround sound, select a surround mode (page 22). • You can also connect a video monitor, turned on while using this unit. If the component is turned off, this unit may distort the sound from other components. • Be sure to connect your video source components in the same way you connect
  • Yamaha HTR-5920 | Owners Manual - Page 19
    DTV/CBL V-AUX IN OUT VCR SURROUND SUB R L WOOFER + + MONITOR OUT Y OPTICAL COAXIAL PB SUB CD WOOFER DTV/CBL DVD OUTPUT DIGITAL INPUT CENTER FRONT R L PR DVD DTV/CBL MONITOR OUT COMPONENT VIDEO + + - - - - 6ΩMIN./SPEAKER CLASS 2 WIRING SPEAKERS 6ΩMIN./SPEAKER English 15
  • Yamaha HTR-5920 | Owners Manual - Page 20
    turned off, this unit may distort the sound from other components. ■ Connecting a CD recorder or MD recorder Connect the input jacks of your CD recorder or MD recorder to the MD/CD-R OUT jacks. Connect -R AUDIO DVD DTV/CBL V-AUX IN OUT VCR SURROUND SUB R L WOOFER + + MONITOR OUT Y
  • Yamaha HTR-5920 | Owners Manual - Page 21
    clearer reception than an indoor one. If you experience poor reception quality, an outdoor antenna may improve the quality. Consult the nearest authorized YAMAHA dealer or service center about outdoor antennas. • The AM loop antenna should always be connected, even if an outdoor AM antenna is
  • Yamaha HTR-5920 | Owners Manual - Page 22
    from the AC wall outlet or if the power supply is cut off for more than one week. TUNER P1 P2 P3 P4 Press STANDBY/ON on the front panel (or POWER on the remote control) to turn on this unit. STANDBY /ON POWER or Front panel Remote control Press STANDBY/ON on the front panel (or
  • Yamaha HTR-5920 | Owners Manual - Page 23
    ) NONE If you have large front/center/surround speakers in your system. If you have small front/center/surround speakers in your system. If you do not have center/surround speakers in your system. SWFR (subwoofer) YES NONE If you have a subwoofer in your system. If you do not have a subwoofer in
  • Yamaha HTR-5920 | Owners Manual - Page 24
    STANDBY /ON or POWER Front panel Remote control 2 Turn on the video monitor connected to this unit. The current input source name appears in the front panel display. 4 Start playback or select a broadcast station on the source component. Refer to the operating instructions for the component
  • Yamaha HTR-5920 | Owners Manual - Page 25
    DTV/CBL VCR V-AUX Front panel Remote control ■ Listening with headphones Connect headphones to the PHONES jack. sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. ■ Muting the sound Press MUTE on the remote control
  • Yamaha HTR-5920 | Owners Manual - Page 26
    LOGIC", "PLII MOVIE" or "PLII MUSIC" with the remote control, press q PLII repeatedly. l PROGRAM h HALL JAZZ ROCK PL or 5 STEREO ■ Surround modes HALL This mode is suited especially for classical music. JAZZ This mode offers a real and vibrant sound. ROCK This mode is ideal for lively, dynamic
  • Yamaha HTR-5920 | Owners Manual - Page 27
    The sound effects are turned off and no sound is output from the center speaker or surround speakers. Press STEREO on the front panel (or STEREO on the remote control) again to turn off the sound effects. STEREO EFFECT Front panel STEREO or Remote control Notes • If you turn off the sound effects
  • Yamaha HTR-5920 | Owners Manual - Page 28
    manual. Automatic tuning is effective when station signals are strong and there is no interference. 32 4 3 STANDBY /ON PHONES PRESET/TUNING EDIT FM/AM A/B/C/D/E NEXT STEREO EFFECT TONE CONTROL lights up and the frequency of the received station is shown in the front panel display. PRESET/TUNING
  • Yamaha HTR-5920 | Owners Manual - Page 29
    /AM TUNING Manual tuning If the signal received from the station you want to select is weak, tune into it manually. Note Manually tuning into STANDBY /ON PHONES PRESET/TUNING EDIT FM/AM A/B/C/D/E NEXT STEREO EFFECT TONE CONTROL l PROGRAM h BASS/TREBLE l PRESET/TUNING h SET MENU MEMORY MAN'L/
  • Yamaha HTR-5920 | Owners Manual - Page 30
    new station under the same preset number. • If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops after store is weak in signal strength, tune into it manually and store it as described in "Manual preset tuning" on page 27. ■ Customized automatic
  • Yamaha HTR-5920 | Owners Manual - Page 31
    to 40 stations (8 stations x 5 groups) manually. 3 4 2,5 4 Press PRESET/TUNING l EDIT FM/AM A/B/C/D/E NEXT STEREO EFFECT TONE CONTROL l PROGRAM h BASS/TREBLE l PRESET/TUNING instructions. AM TUNED kHz When tuned into a station, the front panel display shows the frequency of the station received
  • Yamaha HTR-5920 | Owners Manual - Page 32
    INPUT MODE VOLUME STANDBY POWER CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR V-AUX 1 TUNER P1 P2 P3 P4 P5 P6 A/B/C/D/E P7 P8 PRESET 2 2 Press PRESET/TUNING l / h on the front panel (or one of the preset station number selector buttons or PRESET u / d on the remote control) to select the
  • Yamaha HTR-5920 | Owners Manual - Page 33
    panel display. See "Selecting preset stations" on page 28. STANDBY /ON PHONES PRESET/TUNING EDIT FM/AM A/B/C/D/E NEXT STEREO EFFECT TONE CONTROL l PROGRAM h BASS/TREBLE l PRESET/TUNING h SET MENU MEMORY MAN'L/AUTO FM TUNING MODE AUTO/MAN'L l INPUT h INPUT MODE VOLUME 1 Select preset
  • Yamaha HTR-5920 | Owners Manual - Page 34
    it from being dubbed, the picture itself may be disturbed due to those signals. 1 Turn on all the connected components. 2 Press INPUT l / h on the front panel (or one of the input selector buttons on the remote control) to select the source component you want to record from. INPUT CD MD/CD
  • Yamaha HTR-5920 | Owners Manual - Page 35
    to sleep while this unit is playing or recording a source. STANDBY POWER CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR V-AUX SLEEP Dimming turns off and the front panel display returns to the previous display. y The sleep timer setting can also be canceled by pressing STANDBY on the remote control
  • Yamaha HTR-5920 | Owners Manual - Page 36
    Front left speaker output level CT Center speaker output level FR Front right speaker output level SR Surround right speaker output level SL Surround left speaker output level SW Subwoofer output level 3 Press / on the remote control to adjust the speaker output level. ENTER The control range is
  • Yamaha HTR-5920 | Owners Manual - Page 37
    not listed below or if the instruction below does not help, set this unit to the standby mode, disconnect the power cable, and contact the nearest authorized YAMAHA dealer or service center. ■ General Problem This unit fails to turn on when STANDBY/ ON (or POWER) is pressed, or enters the standby
  • Yamaha HTR-5920 | Owners Manual - Page 38
    to the center channel, and the front and surround speakers output effect sounds. The surround modes are turned off. Press PROGRAM l / h on the front panel (or one 22 of the surround mode selector buttons on the remote control) to set this unit to the surround mode. You are using a source or
  • Yamaha HTR-5920 | Owners Manual - Page 39
    TROUBLESHOOTING Problem Cause Remedy Refer to page Dolby Digital or DTS The connected component is not set to Make an appropriate setting following the operating - sources cannot be output Dolby Digital or DTS digital instructions electricity) or by a power supply with low voltage.
  • Yamaha HTR-5920 | Owners Manual - Page 40
    connections and orient it for the best reception. Use the manual tuning method. Use an outdoor antenna and a ground wire. This will help somewhat, but it is difficult to eliminate all noise. Move this unit away from the TV. Refer to page 17 25 - 17 25 25, 27 - 25 - - ■ Remote control Problem
  • Yamaha HTR-5920 | Owners Manual - Page 41
    all the parameters of this unit. • The initial factory settings are activated next time you turn on this unit. STANDBY /ON PHONES 1,3 PRESET/TUNING EDIT FM/AM A/B/C/D/E NEXT STEREO EFFECT TONE CONTROL l PROGRAM h BASS/TREBLE l PRESET/TUNING h SET MENU MEMORY MAN'L/AUTO FM TUNING MODE AUTO
  • Yamaha HTR-5920 | Owners Manual - Page 42
    rapidly gaining popularity in movie theaters around the world. Digital Theater Systems Inc. has developed a home theater system so that you can enjoy the depth of sound and natural spatial representation of DTS digital surround in your home. This system produces practically distortion-free 6-channel
  • Yamaha HTR-5920 | Owners Manual - Page 43
    ITU-R recommends a standard speaker placement which is used system uses a technique for sampling the size of the analog signal per very small unit of time. Standing for "pulse code sound level can be reproduced. Video signal information ■ Component video signal With the component video signal system
  • Yamaha HTR-5920 | Owners Manual - Page 44
    SPECIFICATIONS SPECIFICATIONS AUDIO SECTION • Minimum RMS Output Power per channel [Front, Center, and Surround] 1 kHz, 0.1% THD, 6 80 W 1 kHz, 10% to FRONT L/R 60 dB/45 dB or more • Tone Control (FRONT L/R) BASS Boost/Cut 10 dB/100 Hz TREBLE Boost/Cut 10 dB/10 kHz • Phones Output 400 mV/470
  • Yamaha HTR-5920 | Owners Manual - Page 45
    ELECTRONIQUE FRANCE S.A. RUE AMBROISE CROIZAT BP70 CROISSY-BEAUBOURG 77312 MARNE-LA-VALLEE CEDEX02, FRANCE YAMAHA ELECTRONICS (UK) LTD. YAMAHA HOUSE, 200 RICKMANSWORTH ROAD WATFORD, HERTS WD18 7GQ, ENGLAND YAMAHA SCANDINAVIA A.B. J A WETTERGRENS GATA 1, BOX 30053, 400 43 VÄSTRA FRÖLUNDA, SWEDEN
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
HTR-5920
AV Receiver
Ampli-tuner audio-vidéo
OWNER’S MANUAL
MODE D’EMPLOI
U