Yamaha HTR-5920 Owners Manual - Page 30

FM/AM TUNING 3 Press and hold MEMORY on the front panel for more than 3 seconds. The preset station number and the MEMORY and AUTO indicators flash. After approximately 5 seconds, automatic presetting starts from the current frequency and proceeds toward the higher frequencies. MEMORY MAN'L/AUTO FM Flashes FM AUTO TUNED MEMORY MHz Flashes When automatic preset tuning is completed, the front panel display shows the frequency of the last preset station. Notes • Any stored station data existing under a preset station number is cleared when you store a new station under the same preset number. • If the number of received stations does not reach 40 (E8), automatic preset tuning automatically stops after searching for all the available stations. • Only FM stations with sufficient signal strength are stored automatically by automatic preset tuning. If the station you want to store is weak in signal strength, tune into it manually and store it as described in "Manual preset tuning" on page 27. ■ Customized automatic preset tuning You can select the preset number from which this unit will store FM stations and/or begin tuning toward lower frequencies. After pressing MEMORY in step 3: 1 Press A/B/C/D/E, and then PRESET/TUNING l / h to select the preset number under which the first station will be stored. Automatic preset tuning stops when stations have all been stored up to E8. 2 Press PRESET/TUNING so that the PRESET indicator disappears from the front panel display and then press PRESET/TUNING l to begin tuning toward the lower frequencies. 26