Yamaha HTR-5920 Owners Manual - Page 10

CONTROLS AND FUNCTIONS Remote control 1 2 STANDBY POWER A 3 CD MD/CD-R TUNER SLEEP DVD DTV/CBL VCR V-AUX B 4 5 6 7 8 9 0 TUNER P1 P2 P3 P4 P5 P6 A/B/C/D/E P7 P8 PRESET VOLUME SET MENU MUTE ENTER LEVEL TEST HALL JAZZ ROCK PL 5 STEREO NIGHT STEREO C D E F G 1 Infrared signal transmitter Outputs infrared control signals. 2 STANDBY Sets this unit in the standby mode. 3 Input selector buttons Select the input source. 4 Preset station number selector buttons (P1 to P8) Select the preset station number (1 to 8) directly when this unit is in the tuner mode. 5 A/B/C/D/E Selects a preset station group (A to E) when this unit is in the tuner mode. 6 VOLUME +/- Increases or decreases the volume level. 7 SET MENU Activates the SET MENU function. 8 Cursor buttons / / / , ENTER Select and adjust the SET MENU items. 9 LEVEL Selects the speaker channel to be adjusted and sets the output level. 0 Surround mode selector buttons Select the surround modes. A POWER Turns on this unit. B SLEEP Sets the sleep timer. C PRESET u / d Select a preset station number (1 to 8) when this unit is in the tuner mode. D MUTE Mutes the audio output. Press MUTE again to restore the audio output to the previous volume level. E TEST Outputs the test tone to adjust the speaker levels. F STEREO Switches between normal stereo and DSP effect reproduction. When you select "STEREO", this unit mixes down all Dolby Digital and DTS signals (except the LFE channel) as well as those 2-channel signals without effect sounds to the front left and right speakers. G NIGHT Turns on or off the night listening mode. The night listening mode is available only for Dolby Digital sources. 6