Yamaha HTR-5920 Owners Manual - Page 25

BASIC OPERATION ■ Selecting input modes This unit comes with 2 types of input jacks. Do the following to select the type of input signals you want to use. 1 Press INPUT l / h on the front panel repeatedly (or one of the input selector buttons on the remote control) to select "DVD" or "DTV/CBL" as the input source. INPUT CD MD/CD-R TUNER or DVD DTV/CBL VCR V-AUX Front panel Remote control ■ Listening with headphones Connect headphones to the PHONES jack. PLAYBACK Note Multi-channel signals (except the LFE channel) are down-mixed to stereo and output from the headphones. ■ Adjusting the frequency response levels You can adjust the frequency response levels of your front left and right speakers. Press TONE CONTROL on the front panel repeatedly to select "BASS" or "TREBLE", then press BASS/TREBLE +/- on the front panel repeatedly to adjust the corresponding frequency response level. TONE CONTROL BASS/TREBLE 2 Press INPUT MODE on the front panel repeatedly to select the desired input mode. INPUT MODE AUTO DTS ANALOG Automatically selects input signals in the following order: 1) Digital signals 2) Analog signals Selects only digital signals encoded in DTS. If no DTS signals are input, no sound is output. Selects only analog signals. If no analog signals are input, no sound is output. y We recommend setting the input mode to "AUTO" in most cases. Notes • When playing a DTS-CD/LD, be sure to set the input mode to DTS. • Depending on the player, DTS decoding may not be performed correctly. • Select "BASS" to adjust the low frequency response level. • Select "TREBLE" to adjust the high frequency response level. Note If you increase or decrease the high-frequency or low-frequency sound to an extreme level, the tonal quality of the surround speakers may not match that of the front left and right speakers. ■ Muting the sound Press MUTE on the remote control. The MUTE indicator flashes in the front panel display. MUTE Press MUTE again or press VOLUME +/- on the remote control to resume the audio output. The MUTE indicator disappears from the front panel display. ■ Playing video sources in the background You can combine a video image from a video source with sound from an audio source. For example, you can enjoy listening to classical music while viewing beautiful scenery from the video source on the video monitor. Use the input selector buttons on the remote control to select a video source and then select an audio source. CD MD/CD-R TUNER DVD DTV/CBL VCR V-AUX English 21