Yamaha HTR-6050 Owner's Manual - Page 24

Connections Using the VIDEO AUX jacks on the front panel Use the VIDEO AUX jacks on the front panel to connect a game console or a video camera to this unit. Caution Be sure to turn down the volume of this unit and other components before making connections. Notes To reproduce the source signals input at these jacks, select "V-AUX" as the input source. STANDBY /ON PHONES SILENT CINEMA SPEAKERS A/B/OFF OPTIMIZER MIC EDIT PRESET/TUNING FM/AM A/B/C/D/E 1 l PRESET/TUNING h SCENE 2 3 4 MEMORY TUNING AUTO/MAN'L TONE CONTROL l PROGRAM h STRAIGHT DIRECT STEREO l INPUT h AUDIO SELECT EFFECT VOLUME VIDEO AUX VIDEO L AUDIO R USB Connecting the FM and AM antennas Both FM and AM indoor antennas are supplied with this unit. In general, these antennas should provide sufficient signal strength. Connect each antenna correctly to the designated terminals. Notes • The AM loop antenna should be placed away from this unit. • A properly installed outdoor antenna provides clearer reception than an indoor one. If you experience poor reception quality, install an outdoor antenna. Consult the nearest authorized Yamaha dealer or service center about outdoor antennas. • The AM loop antenna should always be connected, even if an outdoor AM antenna is connected to this unit. Outdoor AM antenna Use a 5 to 10 m (16 to 32 ft) of vinyl-covered wire extended outdoors from a window. AM loop Indoor FM antenna antenna (supplied) (supplied) VIDEO AUX VIDEO L AUDIO R V L R Video output Audio output Game console or video camera ANTENNA R AM GND FM 75 UNBAL. IN MD/ O (PLAY) CD-R (R Ground For maximum safety and minimum interference, connect the antenna GND terminal to a good earth ground. A good earth ground is a metal stake driven into moist earth. 20 En