Yamaha HTR-6050 Owner's Manual - Page 42
Virtual Cinema Dsp, Silent Cinema
View all Yamaha HTR-6050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Sound field programs ■ Enjoying 2-channel sources using the standard decoders Signals input from 2-channel sources can also be played back on multi-channels. Press DAMP and then press KSUR. DECODE repeatedly to select a decoder. You can select from the following decoders depending on the type of source you are playing and your personal preference. STANDARD Functions PRO LOGIC PLII Movie PLII Music PLII Game Dolby Pro Logic processing for any sources Dolby Pro Logic II processing for movie sources Dolby Pro Logic II processing for music sources Dolby Pro Logic II processing for game sources ■ Using sound field programs without surround speakers (Virtual CINEMA DSP) Virtual CINEMA DSP allows you to enjoy the CINEMA DSP programs without surround speakers by creating virtual speakers. If you set "SUR. L/R SP" to "NONE" (see page 49), Virtual CINEMA DSP activates automatically whenever you select a CINEMA DSP or HiFi DSP program (see page 37). Note Virtual CINEMA DSP will not activate even when "SUR. L/R SP" is set to "NONE" (see page 49) in the following cases: - When "5ch Stereo" (see page 37) is selected. - When headphones are connected to the PHONES jack. ■ Enjoying multi-channel sources and sound field programs with headphones (SILENT CINEMA) SILENT CINEMA allows you to enjoy multi-channel music or movie sound, including Dolby Digital and DTS sources, through ordinary headphones. SILENT CINEMA activates automatically whenever you connect headphones to the PHONES jack while listening to CINEMA DSP or HiFi DSP sound field programs (see page 37). When activated, the SILENT CINEMA indicator lights up in the front panel display. Note SILENT CINEMA does not activate when the component connected to the MULTI CH INPUT jacks is selected as the input source (see page 33). ■ Enjoying unprocessed input sources (Straight decoding mode) When this unit is in the "STRAIGHT" mode, multichannel sources are decoded straight into the appropriate channels without any additional effect processing. 2channel stereo sources are output from only the front left and right speakers. Press BSTRAIGHT (or press DAMP and then press TSTRAIGHT) to select "STRAIGHT". To deactivate the "STRAIGHT" mode, press BSTRAIGHT (or TSTRAIGHT) again so that "STRAIGHT" disappears from the front panel display. 38 En