Yamaha HTR-6050 Owner's Manual - Page 31
If an error screen appears, If WARNING appears, RESULT:EXIT display. - troubleshooting
View all Yamaha HTR-6050 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
PREPARATION ■ If an error screen appears Press Gk / n / l / h to select "RETRY" or "EXIT" and then press GENTER. The following display is an example where "E-5:USER CANCEL" appears in the OSD. AUTO:ERROR . E-5:USER CANCEL Don't operate any function >RETRY EXIT [ ]/[ ]:Select [ENTER]:Return Choices: RETRY, EXIT • Select "RETRY" to retry the "AUTO SETUP" procedure. • Select "EXIT" to exit from the "AUTO SETUP" procedure. Optimizing the speaker setting for your listening room ■ If "WARNING" appears When this unit detects potential problems during the "AUTO SETUP" procedure, "WARNING" appears in the "RESULT:EXIT" display. Check the warning messages to correct your speaker settings. Note Warnings differ from errors in that warnings do not cancel the "AUTO SETUP" procedure. 1 Make sure the pointer is pointing at "WARNING" and then press GENTER to display the detailed information about the warning. The number on the right of "WARNING" indicates the number of warning messages. AUTO:RESULT . WARNING(1) RESULT SP : 3/2/0.1 DIST: 3.2/3.5m LVL : -2/+2dB >SET CANCEL [ ]/[ ]:Up/Down [ENTER]:Enter 2 Press Gl / h repeatedly to toggle between the warning displays. WARNING:W-1 Reverse Channel -- FR CENTER -- -- [p]/[[]:Select [ENTER]:Return y • For details about each warning message, see the "AUTO SETUP" section in "Troubleshooting" on page 65. • When the corresponding warning message is not applicable to a speaker, "- -" is displayed instead. 3 Press GENTER to return to the top "RESULT:EXIT" display. English 27 En