Yamaha HTR-6050 Owner's Manual - Page 57

ADVANCED OPERATION p p ■ Input rename B)INPUT RENAME Use this feature to change the name of the input source that appears in the OSD and in the front panel display. 2 INPUT MENU B)INPUT RENAME DVD -> DVD [p]/[[]:Position [ ]/[ ]:Chara. SET MENU ■ Volume trim C)VOLUME TRIM Use this feature to adjust the output volume of each source. This is useful if you want to balance the level of each input source to avoid sudden changes in volume when switching between input sources. Choices: CD, MD/CD-R, TUNER, DVD, DTV/CBL, V-AUX, DVR, USB, MULTI CH IN Control range: -6.0 to +6.0 dB Control step: 1.0 dB Initial setting: 0.0 dB p p 1 Press one of the input selector buttons (C) or AMULTI CH IN to select the input source you want to change the name of. MULTI CH IN CD MD/CD-R TUNER DVD DTV/CBL DVR 2 INPUT MENU C)VOLUME TRIM DVD DVD ;;;;;;0.0dB [p]/[[]:Adjust [RETURN]:Exit ■ Decoder mode D)DECODER MODE V-AUX USB 2 Press DAMP and then press Gl / h on the remote control to place the "_" (underscore) under the space or the character you want to edit. 3 Press Gk / n to select the character you want to use and then press Gl / h to move to the next space. Notes • You can use up to 8 characters for each input. • Press Gn to change the character in the following order, or press Gk to go in the reverse order: A to Z, a space, 0 to 9, a space, a to z, a space, symbols etc.) 4 Repeat steps 1 through 3 to rename each input source. 5 Press GENTER to exit from "INPUT RENAME". 2 INPUT MENU D)DECODER MODE . >AUTO LAST CD ;;;;AUTO DVD ;;;;AUTO DTV/CBL ;;;;AUTO [ ]/[ ]:Up/Down [p]/[[]:Select Decoder select mode Use this feature to designate the default decoder mode for the input sources connected to the DIGITAL INPUT jacks when you turn on the power of this unit. Choices: AUTO, LAST • Select "AUTO" if you want this unit to automatically detect the type of input signals and select the appropriate decoder mode. • Select "LAST" if you want this unit to automatically select the last decoder mode used the connected input source. DTS decoder prioritize setting Choices: AUTO, DTS • Select "AUTO" if you want this unit to automatically detect input signal types and select the appropriate input mode. • Select "DTS" when you play back a DTS-CD. English 53 En