Yamaha HTR 6250 Owner's Manual - Page 24

Optimizing the speaker setting for your listening room (YPAO) When an error message is displayed during measurement Select "Retry" or "Exit" using nCursor l / h and then press nENTER. ERROR . E-9:USER CANCEL Don't operate any function >Retry Exit [p]/[[]:Select [ENTER]:Return Retry Performs "Auto Setup" again. Exit Terminates the measurement and "Auto Setup." y • See page 51 for details on error messages. • When "E-5:NOISY" appears, you can continue measurement. To continue measurement, select "Proceed." However, we recommend that you solve the problem first and then perform measurement again. When a warning message is displayed after measurement If a problem occurs during measurement, "WARNING" is displayed on the result display screen. Check the error and solve the problems. WARNING W-1:OUT OF PHASE Reverse channel FL --- CENTER SL --- SBL --- [ENTER]:Return y • See page 52 for details on warning messages. • Optimization will not be performed while a warning message is displayed. We recommend that you solve the problem and perform "Auto Setup" again. 1 Check if "→" is displayed on the left of "WARNING" and press nENTER. Details of the warning message are displayed. If there are multiple warning messages, you can display the next message using nCursor h. 2 To return to the top result display, press nENTER again. 20 En