Yamaha HTR 6250 Owner's Manual - Page 42

Operating various settings for this unit (Setup menu) You can call the setup menu using the remote control and change the settings of various menus. You can change the following settings in the setup menu. For details, read "Basic operation of the setup menu" first, and see the respective pages. Menu/Submenu Speaker Setup 1 Auto Setup (YPAO) 2 Manual Setup A)Config B)Level C)Distance D)Equalizer E)Test Tone Sound Setup 1 Dynamic Range 2 Lipsync HDMI Auto Auto Delay Manual Delay Function Setup 1 HDMI Standby Through Audio Output Resolution Aspect 2 Display Dimmer FL Scroll OSD Shift 3 Volume Adaptive DRC Max Volume Init. Volume 4 Input Rename DSP Parameter Memory Guard Function Sets items for speakers. Automatically adjusts output characteristics of speakers. Manually adjusts output characteristics of speakers. Sets speaker configurations, such as connection status of speaker and a size of the connected speaker (sound reproduction capacity), suitable for the listening environment. Separately adjusts volume of each speaker. Adjusts timing at which each speaker outputs sound based on distances between speakers and the listening position. Selects an equalizer that adjusts speaker output characteristics. Generates test tones. Sets various items for sound outputs. Adjusts dynamic ranges of speakers and headphones. Adjusts delay in output timing between video signals and audio signals. Sets on or off of automatic adjustments for delay between output timing between video signals input from the HDMI jack and audio signals. Fine adjusts a delay time of HDMI Auto. Manually fine adjusts the delay of audio and visual output. Set various items for HDMI and display. Sets various items for input sources. Selects on or off of output of HDMI signals input from the HDMI IN jack to the HDMI OUT jack when this unit is on standby. Selects this unit or a component connected to this unit via the HDMI OUT jack of this unit for reproducing sound signals input from the HDMI IN jack. Sets resolution of the HDMI output that is converted from analogy visual input signals. Set an aspect ratio of images reproduced by HDMI signals converted from analog video input signals. Set items for a monitor or the front panel display. Sets brightness of the front panel display. Selects the way to display characters on the front panel display. Adjusts top and bottom positions of the screen displayed on the video monitor. Sets items for volumes. Adjust the dynamic range (difference between the maximum volume and the minimum volume) in conjunction with the volume level. Sets the maximum volume level so that the volume will not be accidentally increased. Sets the volume at the time this unit is turned on. Changes input source names to be displayed on a video monitor or the front panel display. Sets parameters for the sound field programs. Protects some settings against accidental alteration. Page 39 39 39 39 41 41 41 41 41 41 41 41 42 42 42 42 42 42 42 42 42 42 42 43 43 43 43 43 43 43 43 38 En