Yamaha LS9-32 Owner's Manual - Page 269

Warning/Error Messages Message SLOT x: Data Framing Error! SLOT x: Data Overrun! SLOT x: Rx Buffer Full! SLOT x: Tx Buffer Full! Some Song Files Are Unidentified. Song File Not Found! Storage Full! Storage Not Found! Storage Not Ready! Sync Error! [xxx] Tap Operation Ignored. This Operation is Not Allowed. Too Large Files! Loading Failed. Too Many Bands Used! Cannot Compare. Too Many EQ Bands Used! Cannot Paste! Total Slot Power Capability Exceeded! Unsupported File Format! USB: Data Framing Error! USB: Data Overrun! USB: Rx Buffer Full! USB: Tx Buffer Full! USB Currently Active for Recorder function! USB Currently Active for SAVE or LOAD! USB Memory Busy: Recorder Stopped! USB Memory Full! Recorder Stopped. USB Memory Unmounted! Recorder Stopped. USB over current Error! Disconnect USB device. Word Clock Error! Recorder Stopped! Wrong Audio File Format! Wrong Password! Wrong Word Clock! You Cannot Create User Key. Meaning Invalid signals are being input from the SLOT x input port. Invalid signals are being input from the SLOT x input port. Too much data is being received at the SLOT x input port. Too much data is being sent from the SLOT x output port. There was a song file that could not be identified. It is possible that the song being used for DIRECT PLAY or SCENE PLAY BACK LINK is different than the song that was specified. The file assigned to SCENE LINK or to the DIRECT PLAY user defined key does not exist. The file could not be saved because there is not enough space on the USB memory. The USB memory could not be recognized. Access is not possible because the USB memory is not ready. The LS9 is not synchronized with the [xxx] signal. Tap operation was ignored because the TAP TEMPO button is not displayed in the screen. This operation has been ignored because the current user does not have permission. Loading is not possible because the bitmap file is too large. The maximum supported file size is 307,256 bytes. More than 15 bands are used, when trying to copy 31band GEQ and then compare with Flex15GEQ. More than 15 bands are used, when trying to copy 31band GEQ and then paste to Flex15GEQ. The I/O cards installed in the slots exceed the rated power capacity. The file you attempted to load from the USB memory is of an unsupported format. Invalid signals are being input from the USB connector input port. Invalid signals are being input from the USB connector input port. Too much data is being received at the USB connector input port. Too much data is being transmitted from the USB connector output port. Since the USB memory recorder is recording or playing back, functions such as Save/Load cannot be used. The recorder cannot oparate, since mixer scene memory/library data is being saved or loaded in USB memory. Recording/playback stopped because time is required for USB memory processing. Recorder processing was halted because the USB memory capacity ran out while the USB memory recorder was operating. Recorder processing was halted because the USB memory was disconnected while the USB memory recorder was operating. Excessive current has occurred at the USB connector. Disconnect the USB memory that is connected to the USB connector. Recorder was halted because synchronization with the word clock was lost. The format of the audio file is invalid. The password you input was incorrect. The LS9 cannot synchronize because the source selected by MASTER CLOCK SELECT in the WORD CLOCK screen is not appropriate. The current user does not have permission to create a user key. Appendices LS9-16/32 Owner's Manual 269