Yamaha M7CL M7cl V3 Editor Owner's Manual (v3.0.x) - Page 4
Mixer Setup, Mix Bus Setup
View all Yamaha M7CL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
❏ Mixer Setup To open the Mixer Setup dialogbox, choose [Mixer Setup] from the [File] menu. 1 2 A Mix Bus Setup Here you can make settings relating to the MIX buses. Signal Type: Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MIX buses. Bus Type/Send Point: Choose either VARI (PRE FADER) or VARI (PRE EQ) or FIXED for each two adjacent odd-numbered/even-numbered MIX buses. Pan Link: The PAN setting for signals sent to stereo MIX buses will link to the PAN setting for the STEREO bus. This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI. B Matrix Bus Setup Here you can make settings relating to the MATRIX buses. Signal Type: Choose either MONOx2 or STEREO for each two adjacent odd-numbered/even-numbered MATRIX buses. Bus Type/Send Point: Choose either PRE FADER or PRE EQ for each two adjacent odd-numbered/evennumbered MATRIX buses. Pan Link: The PAN setting for signals sent to stereo MATRIX buses will link to the PAN setting for the STEREO bus. This parameter is valid only if the Signal Type is set to STEREO and the Bus Type is set to VARI. 4 M7CL V3 Editor Owner's Manual