Yamaha MCX-2000 MCXSP10 Manual - Page 9
Remote Control Features and Operations - musiccast
UPC - 027108922959
View all Yamaha MCX-2000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Remote Control Features and Operations You can use the supplied remote control to peform most of the MCX-2000 operations (such as selecting a menu item or determining a setting value). Prepare the remote control before operations. Setting Batteries Set batteries inside the remote control as shown below. 1 3 2 1 Remove the bottom cover of the remote control. 2 Set two AA batteries (supplied) in appropriate directions, according to the illustration in the compartment. 3 Slide the cover until it snaps into place. n If the remote control doesn't work well, the batteries may be weak. Replace them with twe new AA batteries. Always handle batteries appropriately, according to the safety precautions at the beginning of this manual. Powering Up Turn on your TV and switch it to external input (connected to the MCX-2000 video output). When you turn on the MCX2000, your TV will show the initial "MusicCAST" splash screen, followed automatically by the Easy Setup screen. TV MCX-2000 1 Turn ON 2 Change to external input AC plug and outlet for US model n The MCX-2000 is designed to show the Easy Setup screen when you first turn on the unit (factory setting). If the Easy Setup screen doesn't appear, press the TOP MENU button on the remote control. When the Top Menu screen is shown on the TV, use the cursor controller (in the center of the remote control) to move the highlighted selection down to Setup (the last item of Top Menu), and press the SELECT button. Then, from the Setup menu screen, select Easy Setup. Scroll down in the display if it's not visible. MCX-2000 Setup Guide 9