Yamaha P-140 Owner's Manual - Page 42

ENGLISH Detailed Settings - [FUNCTION] F4. Split Functions This menu enables you to make various detailed settings for Split. By selecting the right/left voices, changing the split point or other setting, you can optimize the settings for the songs you play. Be sure to select the Split by pressing the [OTHERS] button before engaging Function. If Split is not engaged, will appear instead of and you will be unable to select the Split functions. Also note that you must exit Function before you can engage Split. F4.1: Split Point Setting range: The entire keyboard Default setting: F#2 Set the point on the keyboard that separates the right and left-hand sections (split point). The pressed key is included in the left-hand range. • Instead of pressing the [-/NO] [+/YES] buttons, you can engage the split point by pressing the appropriate key on the keyboard. • Example key name indications for Split Point: (F#2) (G2) Followed by a high bar if sharp (Ab2) Followed by a low bar if flat F4.2: Split Balance Setting range: 0 - 20 (A setting of "10" produces an equal balance between the two Split voices. Settings below "10" increase the volume of the left voice in relation to the right voice, and settings above "10" increase the volume of the right voice in relation to the left voice.) Default setting: Different for each voice combination. The volume level of the two voices combined in Split can be adjusted as required. You can make this setting for each combination of voices individually. F4.3: Right Voice Selection Setting range: 1 - 13 Default setting: 1 Set the right voice. You can select the voices from 1 to 13. Refer to "Preset Voice List" on page 53. F4.4: Left Voice Selection Setting range: 1 - 4 Default setting: 1 Set the left voice. You can select the voices from 1 to 4. Refer to "Preset Voice List" on page 53. F4.5: Right Voice Octave Shift F4.6: Left Voice Octave Shift Setting range: -1, 0, 1 Default setting: Different for each voice combination You can shift the pitch up and down in octave steps for the Right Voice and Left Voice independently. Make a setting depending on the note range of the songs you play. You can make this setting for each combination of voices individually. F4.7: Right Voice Effect Depth F4.8: Left Voice Effect Depth Setting range: 0 - 20 Default setting: Different for each voice combination These functions make it possible to individually set the depth of the effect for the left and right Split voices. The effect depth settings cannot be changed unless the [EFFECT] is ON. You must exit Function before you can turn on an [EFFECT]. You can make this setting for each combination of voices individually. F4.9: Sustain Pedal Range Setting range: ALL (for both voices) 1 (for the right Voice) 2 (for the left Voice) Default setting: ALL The Sustain Pedal Range function determines whether the sustain pedal affects the right voice, the left voice, or both the left and right voices in Split. F4.A: Reset This function resets all Split functions to their default values. Press the [+/YES] button to reset the values. 42 P-140 Owner's Manual