Yamaha PSR-A2000 Owner's Manual - Page 176

Connections - Using Your Instrument with Other Devices - 10 3 Use the [1 ▲▼] buttons to select the function to be assigned to the pedal specified in step 2. For information on available parameters, see pages 176-178. NOTE You can also assign the other functions to the pedal-punch in/out of Song (page 148) and Registration Sequence (page 164). If you assign multiple functions to the pedal, the priority is: Punch in/out of Song → Registration Sequence → Functions assigned here. 4 Use the [2 ▲▼]-[8 ▲▼] buttons to set the details of the selected functions (the part for which the function is applied, etc.). The available parameters differ depending on the function selected in step 3. 5 If necessary, set the polarity of the pedal by using the [I] button. Pedal on/off operation may differ depending on the particular pedal you've connected to the instrument. For example, pressing down on one pedal may turn the selected function on, while pressing a different make/brand of pedal may turn the function off. If necessary, use this setting to reverse the operation. ■ Assignable Pedal Functions For functions indicated with "*", use only the foot controller; proper operation cannot be done with a footswitch. VOLUME* SUSTAIN SOSTENUTO SOFT GLIDE Allows you to use a foot controller to control the volume. You can turn this pedal function on or off for each part on this display. Allows you to use a pedal to control the sustain. When you press and hold the pedal, all notes played on the keyboard have a longer sustain. Releasing the pedal immediately stops (damps) any sustained notes. You can turn this pedal function on or off for each keyboard part on this display. Allows you to use a pedal to control the Sostenuto effect. If you play a note or chord on the keyboard and press the pedal while holding the note(s), the notes will sustain as long as the pedal is held. However, all subsequent notes will not sustain. This makes it possible to sustain a chord, for example, while other notes are played staccato. You can turn this pedal function on or off for each keyboard part on this display. NOTE This function will not affect any of the Organ Flutes Voices, even if this has been assigned to the Foot Pedals. Allows you to use a pedal to control the Soft effect. Pressing this pedal reduces the volume and changes the timbre of the notes you play. This is effective only for certain appropriate Voices. You can turn this pedal function on or off for each keyboard part on this display. When the pedal is pressed, the pitch changes, and then returns to normal pitch when the pedal is released. The following parameters can be set for this function on this display. UP/DOWN Determines whether the pitch change goes up (is raised) or down (is lowered). RANGE Determines the range of the pitch change, in semitones. ON SPEED Determines the speed of the pitch change when the pedal is pressed. OFF SPEED Determines the speed of the pitch change when the pedal is released. LEFT, RIGHT 1, 2 Turns this pedal function on or off for each keyboard part. 176 PSR-A2000 Owner's Manual