Yamaha PSR-S950 Reference Manual - Page 59
Re-Recording a Specific Punch In/Out, NORMAL, FIRST KEY ON, PUNCH IN AT, REPLACE ALL
View all Yamaha PSR-S950 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 59 highlights
Re-Recording a Specific Section-Punch In/Out When re-recording a specific section of an already-recorded Song, use the Punch IN/OUT function. In this method, only the data between the Punch In point and the Punch Out point is overwritten with the newly recorded data. Keep in mind that the notes before and after the Punch In/Out points are not recorded over, although you will hear them play back normally to guide you in the Punch In/Out timing. 1 Select the desired Song for re-recording. 2 Call up the operation display. [FUNCTION] [F] DIGITAL REC MENU [A] SONG CREATOR TAB [E][F] REC MODE 3 Determine the settings for recording. 3 Songs [1 ]- REC START [3 ] (Punch In) [4 ]- REC END [6 ] (Punch Out) Determines the Punch In timing. NORMAL Overwrite recording starts when the Song playback is started via the SONG [F/ K]] (PLAY/PAUSE) button or when you play the keyboard in the Synchro Standby mode. FIRST KEY ON The Song plays back normally, then starts overwrite recording as soon as you play the keyboard. PUNCH IN AT The Song plays back normally up to the beginning of the indicated Punch In measure, then starts overwrite recording at that point. You can set the Punch In measure by pressing the [3 ] button. Determines the Punch Out timing. REPLACE ALL This deletes all data after the point at which recording is stopped. PUNCH OUT The Song position at which recording is stopped is regarded as the Punch Out point. This setting maintains all data after the point at which recording is stopped. PUNCH OUT AT Actual overwrite recording continues until the beginning of the specified Punch Out measure (set with the corresponding display button), at which point recording stops and normal playback continues. This setting maintains all data after the point at which recording is stopped. You can set the Punch Out measure by pressing the [6 ] buttons. PSR-S950/S750 Reference Manual 59