Yamaha R-S700BL Owners Manual - Page 16
PREPARATION, CONNECTIONS, Connecting speakers and source components
View all Yamaha R-S700BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
CONNECTIONS CONNECTIONS Connecting speakers and source components CAUTION • Do not connect this unit or other components to the main power until all connections between components are complete. • All connections must be correct: L (left) to L, R (right) to R, "+" to "+" and "-" to "-". If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass. Refer to the owner's manual for each of your components. • Use RCA cables for audio components (except for speaker connections and DOCK jack connections). • The IMPEDANCE SELECTOR must be set to the appropriate position before connecting speakers. See page 13 for details. • Do not let bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or the speakers. Turntable Tape deck For information about other components that can be connected to this unit, see page 35. Speakers A Audio out Audio GND out Audio in Audio out Audio out Audio out Audio in Audio out CD player VCR, etc. DVD player, etc. CD recorder, Subwoofer etc. Speakers B y • The PHONO jacks are designed for connecting a turntable with an MM cartridge. • Connect your turntable to the GND terminal to reduce noise in the signal. However, for some turntables, you may hear less noise without the GND connection. 12 En