Yamaha R-S700BL Owners Manual - Page 19
Using COUPLER jacks (R-S700 only), Connecting power cable, PREPARATION - r s700 manual
View all Yamaha R-S700BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
PREPARATION CONNECTIONS Using COUPLER jacks (R-S700 only) Removing the jumper pins from the PRE OUT/MAIN IN jacks enables this unit to operate separately as a control amplifier or a power amplifier. These jacks are used to connect a signal-processing system such as a graphic equalizer or a surround-sound processor to this unit. If an external unit is connected to these jacks, the VOLUME control of this unit can be used to adjust the overall sound output level. To connect an external unit, first remove the jumper pins from the PRE OUT/MAIN IN jacks and then connect the input jacks of that external unit to the PRE OUT jacks or its output jacks to the MAIN IN jacks. For details, refer to the owner's manual included with the external unit to be connected. Connecting power cable Plug the power cable into the AC IN on the rear panel of this unit (R-S700 only). Plug the power cable into the AC wall outlet after all other connections are complete. Power cable (R-S700 only) Jumper pins Notes • If you do not use the COUPLER jacks, never remove the jumper pins from these jacks. If removed, no sound will be output from this unit. • Before installing or removing the jumper pins, be sure to disconnect the power cable of the unit. Leaving the power cable connected could cause noise to be emitted from the speakers or damage the unit. • When you use this unit as a power amplifier, connect the output jacks of the external control amplifier, etc. to the MAIN IN jacks of this unit. In this case, the controls of this unit will not function except the PHONES jack and the SPEAKERS A/B buttons. Use the controls on the external control amplifier to make volume adjustments, etc. 15 En