Yamaha R-S700BL Owners Manual - Page 41

BASIC OPERATION PLAYING BACK TUNES FROM YOUR iPhone/iPod/Bluetooth™ COMPONENT Using a Wireless System for iPod By connecting a Wireless System for iPod to this unit, you can play songs on your iPhone/iPod and listen to them using a wireless connection. y You can use the remote control to control the iPhone/iPod. For more information, see page 36. Note When playing an iPhone/iPod using a Wireless System for iPod, playback information is not displayed on the front panel display. YID-W10 transmitter YID-W10 receiver ■ Establishing a wireless connection Once the iPhone/iPod is connected to the YID-W10 transmitter and playback begins, it takes about 5 seconds for audio to be heard. During this time the wireless connection between the YID-W10 transmitter and receiver is established. The status of the wireless connection between the YID-W10 transmitter and receiver is indicated by the respective indicator. Status of Connection YID-W10 transmitter indicator YID-W10 receiver indicator No connection Off Off Confirming connection Green, flashing Blue, flashing Connected Green, lit Blue, lit ■ Controlling this unit with your iPhone/ iPod • When playback begins on an iPhone/iPod that is connected to a YID-W10 transmitter, and if the YID-W10 transmitter is within range of the YID-W10 receiver, this unit performs as follows: - If this unit is already turned on when playback begins: The input source switches to DOCK. - If this unit is in standby mode when playback begins: This unit turns on and the input source switches to DOCK. • In the following situations, the wireless connection between the transmitter and receiver is disconnected. After 30 seconds this unit automatically enters standby mode. - The iPhone/iPod is not operated for about 30-120 seconds after the playback is paused. - The sleep timer of the iPhone/iPod is activated. - The iPhone/iPod is disconnected from the YID-W10 transmitter. - The iPhone/iPod battery level decreases to a level where it cannot provide enough power to the YID-W10 transmitter. - The YID-W10 transmitter is moved outside of the wireless communication range of the YID-W10 receiver. - Communication between the YID-W10 transmitter and receiver becomes disrupted due to interference from other wireless LAN devices, cordless telephones, microwave ovens, etc. y These features can be disabled by setting "Interlock" to "OFF" in the Option menu (see page 42). • Adjusting the volume on the iPhone/iPod also adjusts the volume of this unit. The iPhone/iPod can increase the volume to up to 0 dB (or the value set for the "MaxVol" setting in the Option menu). To further increase the volume, adjust the volume using this unit's VOLUME control or the remote control. y • When this unit is turned on or is in standby mode, your iPhone/ iPod can be charged automatically if the YID-W10 transmitter connected to your iPhone/iPod is stationed in the YID-W10 receiver. The MAIN ZONE indicator remains brightly lit when an iPhone/iPod is being charged. • Refer to the operating instructions of the YID-W10 for more information. Note When the iPhone/iPod is used in Zone 2, these features are not available. 37 En