Yamaha R-S700BL Owners Manual - Page 60
Problem, Cause, Remedy, The remote control, does not work nor, function properly.
View all Yamaha R-S700BL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 60 highlights
TROUBLESHOOTING ■ Remote control Problem The remote control does not work nor function properly. Cause Remedy Wrong distance or angle. The remote control will function within a maximum range of 6 m (20 ft) and no more than 30 degrees offaxis from the front panel. Direct sunlight or lighting (from an inverter type of fluorescent lamp, etc.) is striking the remote control sensor of this unit. Reposition this unit. The batteries are weak. Replace all batteries. The remote control ID and this unit's ID do not match. Switch the remote control ID or this unit's ID. The remote control code was not correctly Try setting another code of the same manufacturer set. using "LIST OF REMOTE CONTROL CODES" at the end of this manual. Even if the remote control code is correctly set, there are some models that do not respond to the remote control. Use the supplied remote control for the components. You did not press the input selector button Press the input selector button corresponding to the corresponding to the component you are component you are trying to control, and then press trying to control. the desired remote control button(s). The remote control is not set to the correct Set the remote control to the correct zone, the Main zone. zone or Zone 2, and then operate the remote control. If the remote control batteries are weak or removed, the remote control ID and zone will switch to the default settings (ID2 and Main zone). Replace all batteries, and then set the remote control ID and zone again. See page 11 - 11 44 49 - - 46 44, 46 56 En