Yamaha RX-V390RDS Owner's Manual - Page 12
Speaker Configuration, Normal, Phantom, Dolby 3 Stereo
![]() |
View all Yamaha RX-V390RDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
89 7 REC/PAUSE STOP DECK A/B VCR MON CENTER MODE + PRO LOGIC 3 STEREO SUR. HALL ROCK DELAY TIME - EFFECT ON/OFF - VOLUME + 9 7 Select the center channel output mode according to your 8 speaker configuration. (Refer to "SPEAKER CONFIGURATION" on page 6.) TEST CENTER MODE NORMAL WIDE PHANTOM 9 Turn up the volume. PHANTOM TEST Flashes continuously. On the feature of each mode, refer to the "Note" shown below. Note In step 7, when you select the center channel output mode, note the following. For 5 speaker configuration) NORMAL: Select this mode when you use a center speaker that is smaller than the front speakers. In this mode, the bass tone will be output from the front speakers. WIDE: Select this mode when you use the center speaker approximately same sized as the front speakers. For 4 speaker configuration) PHANTOM: Select this mode when you do not use the center speaker. The center sound will be output from the left and right front speakers. * When the DOLBY 3 STEREO program is used, the PHANTOM mode cannot be selected. You will hear a test tone (like pink noise) from the left front speaker, then the center speaker, then the right front speaker, and then the rear speakers, for about two seconds each. The display changes as shown below. (L and R) * The test tone from the left rear speaker and the right rear speaker will be heard at the same time. 12
![](/manual_guide/products/yamaha-rxv390rds-owners-manual-34a8cd9/12.png)