Yamaha RX-V390RDS Owner's Manual - Page 13

English, Balance, Center Level, Rear Level, Notes, Volume, Phantom, Front Level - remote

Page 13 highlights

English 11 13 10 12 10 Adjust the BALANCE control so that the effect sound output level of the left front speaker and the right front speaker are the same. BALANCE 0 l l 2 2 3 3 4 L5 4 5R 11 Adjust the sound output level of the center speaker to be at the same level as that of the front speakers with the CENTER LEVEL control. CENTER LEVEL 0 l0 12 Adjust the sound output level of the rear speakers to be at the same level as that of the front speakers with the REAR LEVEL control. 13 Cancel the test tone. TEST DEPHANTOM TEST Stops flashing and disappears Notes q Once you have completed these adjustments, you can adjust whole sound level on your audio system by using the VOLUME control (or the VOLUME keys on the remote control transmitter). q If you use external power amplifiers, their volume controls may also be adjusted to achieve proper balance. q In step 11, if the center channel mode is in the "PHANTOM" position, the sound output level of the center speaker cannot be adjusted. This is because in this mode, the center sound is automatically output from the left and right front speakers. q If there is insufficient sound output from the center and rear speakers, you may decrease the front speaker output level by setting the FRONT LEVEL switch on the rear panel to "-10 dB". REAR LEVEL 0 l0 13

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34

13
English
10
Adjust the
BALANCE
control so that the effect sound
output level of the left front speaker and the right front
speaker are the same.
11
Adjust the sound output level of the center speaker to
be at the same level as that of the front speakers with
the
CENTER LEVEL
control.
12
Adjust the sound output level of the rear speakers to
be at the same level as that of the front speakers with
the
REAR LEVEL
control.
13
Cancel the test tone.
Stops flashing and disappears
Notes
Once you have completed these adjustments, you can
adjust whole sound level on your audio system by using
the
VOLUME
control (or the
VOLUME
keys on the remote
control transmitter).
If you use external power amplifiers, their volume controls
may also be adjusted to achieve proper balance.
In step 11, if the center channel mode is in the
PHANTOM
” position, the sound output level of the center
speaker cannot be adjusted.
This is because in this mode,
the center sound is automatically output from the left and
right front speakers.
If there is insufficient sound output from the center and
rear speakers, you may decrease the front speaker output
level by setting the
FRONT LEVEL
switch on the rear
panel to “–10 dB”.
10
11
12
13
CENTER
LEVEL
0
l0
REAR
LEVEL
0
l0
TEST
DEPHANTOM
TEST
BALANCE
5
5
4
3
2
l
0
l
2
3
4
L
R