Yamaha RX-V390RDS Owner's Manual - Page 17
Tuning Operations, Automatic Tuning, Manual Tuning - stereo receiver
View all Yamaha RX-V390RDS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
English TUNING OPERATIONS Normally, if station signals are strong and there is no interference, quick automatic-search tuning (AUTOMATIC TUNING) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (MANUAL TUNING). 2 AUTOMATIC TUNING 13 1 Select the reception band (FM or AM) while watching the display. FM/AM FM or AM MANUAL TUNING 1 Select the reception band (FM or AM) while watching the display. FM/AM FM or AM 2 TUNING MODE AUTO/MAN'L MONO AUTO TUNING 2 TUNING MODE AUTO/MAN'L MONO "AUTO TUNING" goes off. 3 DOWN TUNING UP 3 Tune to a desired station manually. DOWN TUNING UP To tune to a higher frequency, press the right side once. To tune to a lower frequency, press the left side once. * If the station where tuning search stops is not the desired one, press again. * If the tuning search does not stop at the desired station (because the signals of the station are weak), change to the MANUAL TUNING method. Display information PRESET FM STEREO MHz 0 20 l00 REAR * To continue tuning search, press and hold the button. Note If you tune to an FM station manually, it is received in monaural mode automatically to increase the signal quality. Displays the band and frequency of the received station. * If an RDS station is received, the frequency is then replaced by the station name. (However, if the PS data cannot be received within 5 seconds, "NO PS" flashes, and then it returns to the frequency display.) Refer to page 22 for details. Lights up when an FM stereo broadcast is received in stereo. Indicates the signal level of the received station. 17