Yamaha RX-V395RDS Owner's Manual - Page 11

English, How to Connect

Get Yamaha RX-V395RDS PDF manuals and user guides View all Yamaha RX-V395RDS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

English How to Connect: Connect the SPEAKERS terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is the + and - markings are observed. If these wires are reversed, the sound will be unnatural and lack bass. Caution Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or speakers. To connect to the MAIN SPEAKERS terminals Red: positive (+) Black: negative (-) 2 1 3 1 Unscrew the knob. 2 Insert the bare wire. [Remove approx. 5mm (1/4") insulation from the speaker wires.] 3 Tighten the knob and secure the wire. Banana Plug connections are also possible. Simply insert the Banana Plug connector into the corresponding terminal. To connect to the REAR and CENTER SPEAKERS terminals Red: positive (+) Black: negative (-) 1 3 2 1 Press the tab. 2 Insert the bare wire. [Remove approx. 5mm (1/4") insulation from the speaker wires.] 3 Release the tab and secure the wire. 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
11
English
How to Connect:
Connect the
SPEAKERS
terminals to your speakers with wire of the proper gauge, cut as short as possible.
If the connections are
faulty, no sound will be heard from the speakers.
Make sure that the polarity of the speaker wires is correct, that is the + and –
markings are observed.
If these wires are reversed, the sound will be unnatural and lack bass.
Caution
Do not let the bare speaker wires touch each other or any metal part of this unit. This could damage this unit and/or
speakers.
To connect to the MAIN SPEAKERS terminals
Red: positive (+)
Black: negative (–)
1
Unscrew the knob.
2
Insert the bare wire.
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
3
Tighten the knob and
secure the wire.
1
2
3
2
3
1
To connect to the REAR and CENTER SPEAKERS
terminals
Red: positive (+)
Black: negative (–)
1
Press the tab.
2
Insert the bare wire.
[Remove approx. 5mm
(1/4”) insulation from
the speaker wires.]
3
Release the tab and
secure the wire.
<U.S.A., Canada, Australia, China and General models
only>
Banana Plug connections are also possible. Simply insert the
Banana Plug connector into the corresponding terminal.