Yamaha RX-V395RDS Owner's Manual - Page 20

L R 8 67 6 Select the center channel output mode suitable for your speaker configuration. (Refer to "SPEAKER CONFIGURATION" on page 7.) CENTER MODE NORMAL WIDE PHANTOM On the feature of each mode, refer to the "Note" shown below. Note In step 6, when you select a center channel output mode, note the following. For 5 speaker configuration NORMAL: Select this mode when you use a center speaker that is smaller than the main speakers. In this mode, the bass tone will be output from the main speakers. WIDE: Select this mode when you use a center speaker approximately the same size as the main speakers. For 4 speaker configuration PHANTOM: Select this mode when you do not use the center speaker. The center speaker sound will be output from the left and right main speakers. 9 - + TIME/ LEVEL DELAY/CENTER /REAR/SWFR TEST EFFECT PROGRAM PROLOGIC ENHANCED ON/OFF VCR TV/DBS DVD/LD DIR A DIR B REC/PAUSE PLAY 2CH /6CH A/B TAPE - PRESET + A/B/C/D/E TUNER DISC PLAY CD PHONO POWER /I SLEEP VOLUME 10 7 7 Turn up the volume. VOLUME l6 20 l2 28 8 40 44 60 2 0 -dB You will hear a test tone (like pink noise) in order from the left main speaker, the center speaker, the right main speaker, and then the rear speakers for about two seconds each. The display changes as shown below. Main (L) Center Rear (L and R) Main (R) * The test tone from the left rear speaker and the right rear speaker will be heard at the same time. 8 Adjust the BALANCE control so that the sound output level of the left main speaker and the right main speaker are the same. BALANCE l 0l 2 2 3 3 4 L5 4 5R 20