Yamaha RX-V395RDS Owner's Manual - Page 25

Selecting the SPEAKER system, Adjusting the BALANCE control, Adjusting the subwoofer output level

Page 25 highlights

English Selecting the SPEAKER system Because one or two speaker systems (as main speakers) can be connected to this unit, tEhenSgPlEisAhKERS switches allow you to select speaker system A or B, or both at once. SPEAKERS A B ON OFF Adjusting the BALANCE control Adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused by speaker location or listening room conditions. BALANCE l 0l 2 2 3 3 4 L5 4 5R Note This control is effective only for the sound from the main speakers. Adjusting the BASS and TREBLE controls BASS l 0l 2 2 3 3 4 5 4 5 TREBLE l 0l 2 2 3 3 4 5 4 5 BASS : Turn this clockwise to increase (or counterclockwise to decrease) the low frequency response. TREBLE : Turn this clockwise to increase (or counterclockwise to decrease) the high frequency response. Note These controls are effective only for the sound from the main speakers. Adjusting the subwoofer output level If your audio system includes a subwoofer, and an amplifier driving the subwoofer (or a subwoofer system including an amplifier) is connected to the SUBWOOFER OUTPUT terminal on the rear of this unit, you can adjust the subwoofer output level on this unit. 1 Press once or more so that "SWFR" appears on the display. DELAY/CENTER/ REAR/SWFR 2 By continuously pressing the "+" or "-" side of the TIME/ LEVEL button, the level value changes continuously. If you feel that bass tone is insufficient, increase the level, and if you feel that bass tone is overly emphasized, decrease the level. TIME/LEVEL Control range: MIN, -20 to 0 dB Adjustable 25

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42

25
English
English
Selecting the SPEAKER system
Because one or two speaker systems (as main speakers) can
be connected to this unit, the
SPEAKERS
switches allow you
to select speaker system
A
or
B
, or both at once.
Adjusting the BALANCE control
Adjust the balance of the output volume to the left and right
speakers to compensate for sound imbalance caused by
speaker location or listening room conditions.
Note
This control is effective only for the sound from the main
speakers.
SPEAKERS
A
ON
OFF
B
BALANCE
5
5
4
3
2
l
0
l
2
3
4
L
R
BASS
TREBLE
5
5
4
3
2
l
0
l
2
3
4
5
5
4
3
2
l
0
l
2
3
4
Adjusting the subwoofer output level
If your audio system includes a subwoofer, and an amplifier driving the subwoofer (or a subwoofer system including an amplifier) is
connected to the
SUBWOOFER OUTPUT
terminal on the rear of this unit, you can adjust the subwoofer output level on this unit.
1
Press once or more so that “SWFR” appears on the display.
2
By continuously pressing the “+” or “–” side of the
TIME/
LEVEL
button, the level value changes continuously.
If you feel that bass tone is insufficient, increase the level,
and if you feel that bass tone is overly emphasized,
decrease the level.
Control range:
MIN, –20 to 0 dB
DELAY/CENTER/
REAR/SWFR
TIME
/
LEVEL
Adjustable
Adjusting the BASS and TREBLE
controls
BASS
: Turn this clockwise to increase (or counterclockwise
to decrease) the low frequency response.
TREBLE
: Turn this clockwise to increase (or counterclockwise
to decrease) the high frequency response.
Note
These controls are effective only for the sound from the main
speakers.