Yamaha RX-V590 Owner's Manual - Page 12

SPEAKER BALANCE ADJUSTMENT This procedure lets you adjust the sound output level balance between the front, center, and rear speakers using the built-in test tone generator. With this adjustment, the sound output level heard at the listening position will be the same from each speaker. This is important for the best performance of the digital sound field processor. The adjustment of each speaker output level should be done at your listening position with the remote control transmitter. Otherwise, the result may not be satisfactory. < > For U.S.A., Canada and Australia models only Use the remote control transmitter with the YPC-USER-LEARN switch on it set to the YPC position. 4 51 5 Australia models SEARCH STOP PLAY TAPE MON REC MUTE REC/PAUSE DIR A DIR B SEARCH PAUSE/STOP PLAY LD/TV CHAPTER/CH DISPLAY STOP VCR 1 PRO LOGIC 1 ENHANCED 2 SURROUND STADIUM DISCO 5 6 CONCERT VIDEO 3 ROCK 7 MONO MOVIE 4 HALL 8 VCR 2 V-AUX DSP EFFECT ON/OFF MASTER VOLUME REC PAUSE DIR A PLAY DIR B TAPE MON TEST STOP LD/TV PRO LOGIC ENHANCED CNCT VIDEO VCR 1 CENTER SUR. LEVEL MONO MOVIE STADIUM DISCO VCR 2 ROCK HALL EFFECT ON/OFF V AUX REAR LEVEL DELAY TIME VOLUME 5 2 3 1 4 POWER Set to the " ∞ " position. 2 Select the front speakers to be used. SPEAKERS A B ON ON OFF OFF * If you use two front speaker systems, press both the A and B switches. 3 BASS 0 l l 2 2 3 3 4 5 4 5 TREBLE 0 l l 2 2 3 3 4 5 4 5 BALANCE 0 l l 2 2 3 3 4 L5 4 5R Set to the "0" position. 5 Select the PRO LOGIC or PRO LOGIC ENHANCED mode, so that the corresponding name is illuminated on the display. DIGITAL SOUND FIELD PROCESSOR CONCERT MONO PRO LOGIC ENHANCED VIDEO MOVIE STADIUM ROCK CONCERT DISCO CONCERT HALL EFFECT 12