Yamaha RX-V590 Owner's Manual - Page 24

To play a source with the digital sound field processor 32 2 3 Australia models CHAPTER/CH DISPLAY STOP VCR 1 PRO LOGIC 1 ENHANCED 2 SURROUND STADIUM DISCO 5 6 CONCERT VIDEO 3 ROCK 7 MONO MOVIE 4 HALL 8 VCR 2 V-AUX DSP EFFECT ON/OFF MASTER VOLUME CENTER LEVEL REAR LEVEL DELAY TIME TEST RESET CLEAR REC PAUSE DIR A PLAY DIR B TAPE MON TEST STOP LD/TV PRO LOGIC ENHANCED CNCT VIDEO VCR 1 CENTER SUR. LEVEL MONO MOVIE STADIUM DISCO VCR 2 ROCK HALL EFFECT ON/OFF V AUX REAR LEVEL DELAY TIME VOLUME 2 3 1 Follow steps 1 - 6 shown in "BASIC OPERATIONS" on page 15. 2 Select the desired program that is suitable for the source. DIGITAL SOUND FIELD PROCESSOR CONCERT MONO PRO LOGIC ENHANCED VIDEO MOVIE STADIUM ROCK CONCERT DISCO CONCERT HALL EFFECT PRO LOGIC The selected program name is shown on the display. 3 If desired, adjust the delay time and the output level of each speaker. (For details, refer to the corresponding descriptions on this page and the next page.) Notes q If you prefer to cancel the DSP, press the EFFECT switch. The sound will be the normal 2-channel stereo without surround sound effect. q When CONCERT VIDEO, MONO MOVIE, STADIUM, DISCO, ROCK CONCERT or CONCERT HALL is selected, no sound is heard from the center speaker. q When a monaural sound source is played with DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED, no sound is heard from the front speakers and the rear speakers. Sound is heard only from the center speaker. However, if the center channel mode is in PHANTOM, the front speakers output the sound of the center channel. q When this unit's Dolby Pro Logic Surround system is used, if the main-source sound is considerably altered by overadjustment of the BASS or TREBLE controls, the relationship between the center and rear channels may produce an unnatural effect. * The following adjustments can be done on the remote control transmitter as well as on the front panel. Adjustment of the CENTER LEVEL If desired, you can adjust the sound output level of the center speaker even if the output level is already set in "SPEAKER BALANCE ADJUSTMENT" on page 14. Lights up. CENTER LEVEL CENTER Adjustable By continuously pressing "+" or "-" on the CENTER LEVEL control, the level value changes continuously. However, the value stops changing momentarily at the preset point (80). q If the digital sound field program CONCERT VIDEO, MONO MOVIE, STADIUM, DISCO, ROCK CONCERT or CONCERT HALL is selected, the CENTER LEVEL control cannot function. q Once the output level is adjusted, the level value will be the same in the DOLBY PRO LOGIC and DOLBY PRO LOGIC ENHANCED programs. q If a digital sound field program is not used, the CENTER LEVEL control will not function. 24