Yamaha RX-V590 Owner's Manual - Page 6

Speaker Setup For This Unit, Speakers To Be Used, Speaker Configuration, Speaker Placement

Page 6 highlights

SPEAKER SETUP FOR THIS UNIT SPEAKERS TO BE USED This unit is designed to provide the best sound-field quality with a 5 speaker configuration. The speakers to be used with this unit will be mainly front speakers, rear speakers, and a center speaker. (You can omit the center speaker. Refer to the "4-Speaker Configuration" shown below.) The front speakers are used for the main source sound and the effect sound. They will probably be the speakers of your present stereo speaker system. The rear speakers are used for the effect sound. And the center speaker is used for the center sound (dialog etc.) encoded with the Dolby Surround. The rear and center speakers do not need to be equal in power to the front speakers. However, all the speakers should have high enough power handling to accept the maximum output of this unit. SPEAKER CONFIGURATION 5-Speaker Configuration This configuration is the most effective and recommended one. In this configuration, the center speaker is necessary as well as the rear speakers. If the digital sound field program DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected, conversations will be output from the center speaker and the ambience will be excellent. q Set the center channel mode to the "NORMAL" or "WIDE" position. (For details, refer to page 13.) 4-Speaker Configuration The center speaker is not used in this configuration. If the digital sound field program DOLBY PRO LOGIC or DOLBY PRO LOGIC ENHANCED is selected, the center sound is output from the left and the right front speakers. However, the sound effect of other programs can be the same as that of the 5-speaker configuration. q Be sure to set the center channel mode to the "PHANTOM" position. (For details, refer to page 13.) Front L Center Front R Front L Front R Dialogue Dialogue Surround sound Rear L Rear R Surround sound Rear L Rear R SPEAKER PLACEMENT The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs: front speakers (your normal stereo speakers), and rear speakers, plus a center speaker. When you place these speakers, refer to the following. Front R Center Front L TV set Rear R Front: In normal position. (The position of your present stereo speaker system.) Rear: Behind your listening position, facing slightly inward. Nearly six feet (approx. 1.8 m) up from the floor. Center: Precisely between the front speakers. (To avoid interference with TV sets, use a magnetically shielded speaker.) Rear L 6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35

6
SPEAKER SETUP FOR THIS UNIT
SPEAKERS TO BE USED
This unit is designed to provide the best sound-field quality with a 5 speaker configuration.
The speakers to be used with this unit
will be mainly front speakers, rear speakers, and a center speaker.
(You can omit the center speaker.
Refer to the “
4-Speaker
Configuration
” shown below.)
The front speakers are used for the main source sound and the effect sound.
They will probably be the speakers of your present
stereo speaker system.
The rear speakers are used for the effect sound.
And the center speaker is used for the center sound
(dialog etc.) encoded with the Dolby Surround.
The rear and center speakers do not need to be equal in power to the front
speakers.
However, all the speakers should have high enough power handling to accept the maximum output of this unit.
SPEAKER CONFIGURATION
5-Speaker Configuration
This configuration is the most effective and recommended one.
In this configuration, the center speaker is necessary as well as
the rear speakers.
If the digital sound field program
DOLBY
PRO LOGIC
or
DOLBY PRO LOGIC ENHANCED
is selected,
conversations will be output from the center speaker and the
ambience will be excellent.
Set the center channel mode to the “
NORMAL
” or “
WIDE
position.
(For details, refer to page 13.)
4-Speaker Configuration
The center speaker is not used in this configuration.
If the
digital sound field program
DOLBY PRO LOGIC
or
DOLBY
PRO LOGIC ENHANCED
is selected, the center sound is
output from the left and the right front speakers.
However, the
sound effect of other programs can be the same as that of the
5-speaker configuration.
Be sure to set the center channel mode to the “
PHANTOM
position.
(For details, refer to page 13.)
SPEAKER PLACEMENT
The recommended speaker configuration, the 5-speaker configuration, will require two speaker pairs:
front speakers
(your normal
stereo speakers), and
rear speakers
, plus a
center speaker
.
When you place these speakers, refer to the following.
Front:
In normal position.
(The position of your present
stereo speaker system.)
Rear:
Behind your listening position, facing slightly inward.
Nearly six feet (approx. 1.8 m) up from the floor.
Center:
Precisely between the front speakers.
(To avoid
interference with TV sets, use a magnetically shielded
speaker.)
Front L
Center
Front R
Dialogue
Surround sound
Dialogue
Surround sound
Rear L
Rear R
Front L
Front R
Dialogue
Surround sound
Dialogue
Surround sound
Rear L
Rear R
Front R
Center
Front L
TV set
Rear R
Rear L