Yamaha RX-V590 Owner's Manual - Page 26

SETTING THE SLEEP TIMER If you use the SLEEP timer of this unit, you can make this unit turn off automatically. When you are going to sleep while enjoying a broadcast or other desired input source, this timer function is helpful. Notes q The SLEEP timer can be controlled only with the remote control transmitter. q The components on which the SLEEP timer is effective are the sources connected to the SWITCHED AC OUTLET(S) on the rear panel of this unit. To set the SLEEP time 1 SLEEP Press once or more to select the desired SLEEP time. Indicates the SLEEP time. SLEEP l00 ms T Flashes on and off continuously. Whenever the SLEEP key is pressed, the SLEEP time will change as follows. To cancel the selected SLEEP time SLEEP Press once or more so that the display returns to the indication before the SLEEP timer is set. ("SLEEP" will go off from the display.) Note The SLEEP timer setting can also be canceled by turning off the power with the POWER switch or disconnecting the power plug of this unit from the AC outlet. (Minutes) 120 90 60 30 The SLEEP timer is OFF. (The indication before the SLEEP key is pressed.) After a while, the display returns to the indication before the SLEEP timer is set, and the "SLEEP" indicator stops flashing and lights up. 2 The unit will be turned off automatically at the selected SLEEP time. 26