Yamaha RX-V595aRDS Owner's Manual - Page 31

AUTOMATIC PRESET TUNING for RDS stations only, To store stations

Get Yamaha RX-V595aRDS PDF manuals and user guides View all Yamaha RX-V595aRDS manuals
Add to My Manuals
Save this manual to your list of manuals

Page 31 highlights

English AUTOMATIC PRESET TUNING (for RDS stations only) You can also make use of the automatic preset tuning function for RDS stations only. This function enables the unit to perform automatic tuning and to sequentially store RDS stations with strong signals. Up to 40 stations can be stored automatically in the same way as that for manual preset tuning on page 29. Note that a new setting can be stored in place of the former one. * See pages 33 to 35 for details on RDS stations. 31 To store stations 1 Select the FM band. Front panel 2 Press TUNING MODE so that the "AUTO TUNING" indicator lights up on the display. Front panel Lights up 3 Press MEMORY and hold for about three seconds. Front panel Flashes 24 4 To tune in to higher frequencies, press the UP side of TUNING once. To tune in to lower frequencies, press the DOWN side of TUNING once. Front panel * If TUNING is not pressed, automatic preset tuning soon begins automatically toward the higher frequencies. Automatic preset tuning begins from the frequency currently displayed. Received stations are sequentially stored as A1, A2 ... A8. * If more than 8 stations are received, they are stored as preset station numbers in other groups (B, C, D and E) in that order. If you want to store the first station received by automatic preset tuning as a desired preset station number For example, if you want to store the first received station as C5, select "C5" while "A1", the "MEMORY" indicator and the "AUTO TUNING" indicator flash after pressing MEMORY in step 3. Then press TUNING. The first received station is stored as C5, and the next stations as sequentially C6, C7 ... . If stations have all been stored up to E8, automatic preset tuning stops automatically. When automatic preset tuning is completed The display shows the frequency of the last preset station. Check the contents and the number of preset stations by following the procedure in the section "To recall a preset station" on page 30. 31

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
31
English
To store stations
1
Select the FM band.
Front panel
2
Press
TUNING MODE
so that the “AUTO TUNING”
indicator lights up on the display.
Front panel
Lights up
3
Press
MEMORY
and hold for about three seconds.
Front panel
Flashes
AUTOMATIC PRESET TUNING (for RDS stations only)
You can also make use of the automatic preset tuning function for RDS stations only.
This function enables the unit to perform
automatic tuning and to sequentially store RDS stations with strong signals.
Up to 40 stations can be stored automatically in the
same way as that for manual preset tuning on page 29.
Note that a new setting can be stored in place of the former one.
*
See pages 33 to 35 for details on RDS stations.
4
To tune in to higher frequencies, press the UP side of
TUNING
once.
To tune in to lower frequencies, press the DOWN side
of
TUNING
once.
Front panel
* If
TUNING
is not pressed, automatic preset tuning soon
begins automatically toward the higher frequencies.
Automatic preset tuning begins from the frequency currently
displayed.
Received stations are sequentially stored as A1,
A2 ... A8.
*
If more than 8 stations are received, they are stored as
preset station numbers in other groups (B, C, D and E) in
that order.
If you want to store the first station received by automatic
preset tuning as a desired preset station number
For example, if you want to store the first received station as C5,
select “C5” while “A1”, the “MEMORY” indicator and the “AUTO
TUNING” indicator flash after pressing
MEMORY
in step 3.
Then
press
TUNING
.
The first received station is stored as C5, and
the next stations as sequentially C6, C7 ... .
If stations have all been stored up to E8, automatic preset tuning
stops automatically.
When automatic preset tuning is completed
The display shows the frequency of the last preset station.
Check the contents and the number of preset stations by
following the procedure in the section “To recall a preset
station” on page 30.
31
4
2